User Guide

Hint

When making or receiving a call, only operate the speaker where the (BLUETOOTH) indicator lights up.

If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the BLUETOOTH device that is

connecting with the speaker, there may be distorted sound or noise in the speaker output. In this case, terminate the BLUETOOTH connection

between the BLUETOOTH device and other BLUETOOTH device(s).

When using the Speaker Add function, switch the codec to SBC.

Set up the second speaker within 1 minute. If you do not set it up within 1 minute, the setting of the first speaker will be canceled.

Operate the speaker where the (BLUETOOTH) indicator is flashing to make a BLUETOOTH

connection with a BLUETOOTH device.

When the

(BLUETOOTH) indicator of the speaker stops flashing and lights up, the BLUETOOTH connection is

established.

Start playback on the BLUETOOTH device, and adjust the volume to moderate level.

Press the –/+ (volume) buttons on one of the speakers to adjust the volume.

Volume adjustment of one speaker is reflected on the other.