Multi Channel AV Receiver Operating Instructions

105
GB
Additional Information
Error message
If there is a malfunction, the display shows
a code of two numbers and a message. You
can check the condition of the system by the
message. Refer to the following table to
solve the problem. If any problem persists,
consult your nearest Sony dealer.
PROTECTOR
Irregular current is being output from the
speakers, or the upper panel of the receiver
is covered with something. The receiver will
automatically turn off after a few seconds.
Check the speaker connection and turn on
the power again.
Reference sections for clearing
the memory
Specifications
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
1) 2)
(8 ohms 1 kHz, THD
0.7%):
105 W + 105 W
Rated Power Output at Stereo Mode
2)
(4 ohms 1 kHz, THD
0.7%):
105 W + 105 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz,
THD 0.09%)
FRONT
2)
:
100 W + 100 W
CENTER
2)
:
100 W
SURROUND
2)
:
100 W + 100 W
SURROUND BACK
2)
:
100 W + 100 W
Reference Power Output
(4 ohms 20 Hz – 20 kHz,
THD 0.15%)
FRONT
2)
:
100 W + 100 W
CENTER
2)
:
100 W
SURROUND
2)
:
100 W + 100 W
SURROUND BACK
2)
:
100 W + 100 W
Reference Power Output at Stereo Mode
1) 2)
(8 ohms 1 kHz, THD
10%):
130 W + 130 W
Reference Power Output at Stereo Mode
2)
(4 ohms 1 kHz, THD
10%):
130 W + 130 W
To clear See
All memorized settings page 36
Customized sound fields page 76
continued