Multi Channel AV Receiver Operating Instructions

Notes

• You cannot use the FRONT SPEAKERS B jacks

for a bi-amplifier connection.

• When you use the auto calibration function, make

the bi-amplifier settings before you perform auto

calibration.

• If you make the bi-amplifier settings, the speaker

level, balance, and equalizer settings of the

surround back speakers become invalid, and those

of the front speakers are used.

• Signals output from the PRE OUT jacks are used

with the same settings as those of the SPEAKERS

terminals.

• The audio signal of the center speaker of the

MULTI CHANNEL INPUT jack is not output

from the front left/right speakers when you set

“SUR BACK SP” to “BI-AMP” in the Speaker

Settings menu.