lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB01COV_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB02REG_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 2 Friday, July 16, 2004 2:34 PM WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB02REG_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 3 Friday, July 16, 2004 2:34 PM About This Manual • The instructions in this manual are for model STR-DE497. Check your model number by looking at the lower right corner of the front panel. • The instructions in this manual describe the controls on the receiver.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB01COV_STR-DE497CELTOC.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 4 Friday, July 16, 2004 2:34 PM Table of Contents Getting Started 1: Check how to hookup your components....................................... 5 1a: Connecting components with digital audio output jacks ........... 7 1b: Connecting components with multi channel output jacks........ 10 1c: Connecting components with only analog audio jacks ....................
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 5 Friday, July 16, 2004 2:34 PM Getting Started Steps 1a through 1c beginning on page 7 describe how to hook up your components to this receiver. Before you begin, refer to “Connectable components” below for the pages which describe how to connect each component. After hooking up all your components, proceed to “2: Connecting the antennas” (page 14).
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 6 Friday, July 16, 2004 2:34 PM Required cords The hookup diagrams on the subsequent pages assume the use of the following optional connection cords (A to F) (not supplied).
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 7 Friday, July 16, 2004 2:34 PM . 1a: Connecting components with digital audio output jacks Getting Started Hooking up a DVD player or satellite tuner For details on the required cords (A–F), see page 6. 1 Connect the audio jacks.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 8 Friday, July 16, 2004 2:34 PM 2 Connect the video jacks.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 9 Friday, July 16, 2004 2:34 PM Hooking up a Super Audio CD/CD player Getting Started For details on the required cords (A–F), see page 6.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 10 Friday, July 16, 2004 2:34 PM 1b: Connecting components with multi channel output jacks 1 Connect the audio jacks. If your DVD or Super Audio CD player is equipped with multi channel output jacks, you can connect it to this receiver’s MULTI CH IN jacks to enjoy the multi channel sound.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 11 Friday, July 16, 2004 2:34 PM 2 Connect the video jacks.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 12 Friday, July 16, 2004 2:34 PM 1c: Connecting components with only analog audio jacks Hooking up audio components For details on the required cords (A–F), see page 6.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 13 Friday, July 16, 2004 2:34 PM Hooking up video components VCR INPUT OUTPUT VIDEO IN VIDEO OUT AUDIO IN AUDIO OUT Getting Started If you connect your TV to the MONITOR VIDEO OUT jack, you can watch the video from the selected input (page 21). For details on the required cords (A–F), see page 6.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 14 Friday, July 16, 2004 2:34 PM 2: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 15 Friday, July 16, 2004 2:34 PM 3: Connecting speakers Example of 5.1 channel speaker system configuration Getting Started Connect your speakers to the receiver. This receiver allows you to use a 5.1 channel speaker system.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 17 Friday, July 16, 2004 2:34 PM Setting the voltage selector If your receiver has a voltage selector on the rear panel, check that the voltage selector is set to the local power supply voltage. If not, use a screwdriver to set the selector to the correct position before connecting the AC power cord to a wall outlet.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 18 Friday, July 16, 2004 2:34 PM x 5: Setting up the speakers You can use the SET UP menu to set the size, distance and location of the speakers connected to this receiver. 1 2 3 Press ?/1 to turn on the receiver. Press MAIN MENU repeatedly to select “ SET UP ”. Press or repeatedly to select the parameter you want to adjust.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 19 Friday, July 16, 2004 2:34 PM x SR SL XXXXX (SURROUND) (Surround speaker size) • LARGE If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”. Normally, select “LARGE”. However, if the front speakers are set to “SMALL”, you cannot set the surround speakers to “LARGE”.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB03CON_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 20 Friday, July 16, 2004 2:34 PM Tip The receiver lets you to input the speaker position in terms of distance. However, it is not possible to set the center speaker further than the front speakers. Also, the center speaker cannot be set more that 1.5 meters closer than the front speakers.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB04BSC_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 21 Friday, July 16, 2004 2:34 PM Amplifier Operation Selecting the component Press input buttons to select the input. DVD You can select the audio directly from the components connected to the MULTI CH IN jacks. This enables you to enjoy high quality analog inputs such as DVD or Super Audio CD. When MULTI CH IN is selected, the tone and sound field cannot be used.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB04BSC_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 22 Friday, July 16, 2004 2:34 PM Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (see page 14). Direct tuning You can enter the frequency of the station you want directly. Use the remote for the operation.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB04BSC_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 23 Friday, July 16, 2004 2:34 PM Storing FM stations automatically — AUTOBETICAL Presetting radio stations (Models of area code CEL, CEK only) This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB04BSC_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 24 Friday, July 16, 2004 2:34 PM Tuning to preset stations 1 Press TUNER FM/AM repeatedly to select the FM or AM band. The last received station is tuned in. 2 Press PRESET TUNING + or PRESET TUNING – repeatedly to select the preset station you want. Each time you press the button, you can select the preset station as follows: tA1yA2y...yA0yB1yB2y...yB0T tC0y...
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB04BSC_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 25 Friday, July 16, 2004 2:34 PM Program type indication Description While receiving an RDS station, press DISPLAY repeatedly.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB04BSC_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 26 Friday, July 16, 2004 2:34 PM Changing the display Changing the information in the display You can check the sound field etc. by changing the information in the display. Press DISPLAY repeatedly. Each time you press DISPLAY, the display will change cyclically as follows.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB04BSC_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 27 Friday, July 16, 2004 2:34 PM About the indications in the display 1 2 3 4 5 6 RDS MEMORY STEREO MONO SW qs qa D.RANGE 0 9 A SW: Lights up when sub woofer selection is set to “YES” (page 18) and audio signal is output from the SUB WOOFER jack.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB05SND_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 28 Friday, July 16, 2004 2:34 PM Enjoying Surround Sound Using only the front speakers In this mode, the receiver outputs the sound from the front left/right speakers only. There is no sound from the sub woofer.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB05SND_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 29 Friday, July 16, 2004 2:34 PM Enjoying stereo sound in multi channel (2 channel decoding mode) You can take advantage of surround sound simply by selecting one of the receiver’s preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. Press A.F.D. repeatedly to select the 2 channel decoding mode.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB05SND_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 30 Friday, July 16, 2004 2:34 PM x C.ST.EX C (CINEMA STUDIO EX C) DCS Reproduces the sound characteristics of the Sony Pictures Entertainment scoring stage. This mode is ideal for watching musicals or films where orchestra music is featured in the soundtrack. About CINEMA STUDIO EX modes CINEMA STUDIO EX modes are suitable for watching motion picture DVDs (etc.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB06ADV_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 31 Friday, July 16, 2004 2:34 PM Advanced Adjustments and Settings Switching the audio input mode for digital components — INPUT MODE 1 2 Press input buttons to select the input. Press INPUT MODE repeatedly to select the audio input mode. The selected audio input mode appears in the display.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB06ADV_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 32 Friday, July 16, 2004 2:34 PM x CTR XXX dB (Center speaker level) x SUR.L. XXX dB (Surround speaker (left) level) x SUR.R. XXX dB (Surround speaker (right) level) x S.W. XXX dB (Sub woofer level) Initial setting: 0 dB You can adjust from –10 dB to +10 dB in 1 dB steps. x Resetting sound fields to the initial settings Use the buttons on the receiver for the operation.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB06ADV_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 33 Friday, July 16, 2004 2:34 PM Adjusting the tone You can adjust the tonal quality (bass, treble level) of the front speakers using the TONE menu. 1 3 Press MAIN MENU repeatedly to select “ TONE ”. 5 You can adjust various receiver settings using the CUSTOMIZE menu. 1 2 Press or repeatedly to select the parameter you want to adjust.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB06ADV_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 34 Friday, July 16, 2004 2:34 PM x DUAL XXX (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB070TH_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 35 Friday, July 16, 2004 2:34 PM Tips • You can select the character type as follows by pressing + or – repeatedly. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press + or – repeatedly until a blank space appears in the display.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB070TH_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 36 Friday, July 16, 2004 2:34 PM Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Use the remote for the operation. Press SLEEP repeatedly while the power is on.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB070TH_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 37 Friday, July 16, 2004 2:34 PM Recording Before you begin, make sure you have connected all components properly. Recording on an audio tape or MiniDisc Recording on a video tape You can record from a VCR, a TV or a DVD using the receiver. You can also add audio from a variety of audio sources when editing a video tape.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB08REM_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 38 Friday, July 16, 2004 2:34 PM Operations Using the Remote RM-U306B You can use the remote RM-U306B to operate the components in your system. Remote button description Before you use your remote AV ?/1 SLEEP ?/1 ea e; 1 Inserting batteries into the remote Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartment.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB08REM_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 39 Friday, July 16, 2004 2:34 PM Remote Button Operations Function Remote Button Operations Function ANT TV/VTR wd VCR Selects output signal from the antenna terminal: TV signal or VCR program. MENU Receiver qs Selects a menu item. MENU –/+ Receiver qd Adjusts or changes the setting.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB08REM_STRDE497-CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 40 Friday, July 16, 2004 2:34 PM Remote Button Operations Function Remote Button TUNER wj Receiver To listen to radio programs. TV CH +/– qg TV Selects preset TV channels. TV/VIDEO wf TV Selects input signal: TV input or video input. ./> VCR/ Skips tracks.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB08REM_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 41 Friday, July 16, 2004 2:34 PM Remote Button Operations Function O wh DVD player Returns to the previous menu or exits the menu. V/v/B/b wh DVD player Selects a menu item. Notes If the factory settings of the input buttons do not match your system components, you can change them.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB09ADD_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 42 Friday, July 16, 2004 2:34 PM On cleaning Additional Information Precautions On safety Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB09ADD_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 43 Friday, July 16, 2004 2:34 PM Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. There is no sound from a specific component. • Check that the component is connected correctly to the audio input jacks for that component.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB09ADD_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 44 Friday, July 16, 2004 2:34 PM Dolby Digital or DTS multi channel sound is not reproduced. • Check that the playing DVD, etc. is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc. to the digital input jacks of this receiver, check the audio setting (settings for the audio output) of the connected component. Recording cannot be done.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB09ADD_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 45 Friday, July 16, 2004 2:34 PM If you are unable to remedy the problem using the troubleshooting guide Clearing the receiver’s memory may remedy the problem (page 17). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver. If the problem persist Consult your nearest Sony dealer.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB09ADD_STR-DE497CEL.fm] masterpage:Left GB01COV_STR-DE497-CEL.book Page 46 Friday, July 16, 2004 2:34 PM Models of other area code Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB09ADD_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB09ADD_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.book Page 48 Friday, July 16, 2004 2:34 PM List of button locations and reference pages How to use page 48 and 49 Use this page to find the location of buttons that are mentioned in the text. Illustration number r DISPLAY 3 (25, 26, 44) R Name of button/part R Reference page Main unit ALPHABETICAL ORDER A-L A.F.D.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB09ADD_STR-DE497CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB01COV_STR-DE497CELIX.fm] masterpage:Left GB01COV_STR-DE497-CEL.
lename[D:\DataSEM_Llily\Revision_DE497\4252084131\4252084131\GB010BKC_STRDE497-CEL.fm] masterpage:Right GB01COV_STR-DE497-CEL.