Help Guide (Web manual)

Help Guide

MULTI CHANNEL AV RECEIVER

STR-DH590

No image and/or sound is output from the TV when the receiver is in the standby

mode.

When the receiver enters the standby mode, image and/or sound from the HDMI device selected right before the

receiver entered the standby mode is output to the TV. If no image and/or sound is output, perform the following

operations:

Turn on the receiver, and then select the input to which the playback device is connected.

Press AMP MENU, then set “<HDMI>” - “CTRL.HDMI” to “CTRL ON,” and then set “<HDMI>” - “STBY.THRU” to

“AUTO” or “ON” on the display panel.

If a device that supports the Control for HDMI function but is not manufactured by Sony is connected, press AMP

MENU and set “<HDMI>” - “CTRL.HDMI” to “CTRL ON” on the display panel.

101