Help Guide (Web manual)

Help Guide

MULTI CHANNEL AV RECEIVER

STR-DH590

Listening to FM radio

You can listen to FM broadcasts through the built-in tuner. Scan the radio frequencies by the following procedure to tune

in to a station automatically. Be sure that the FM wire antenna (aerial) is connected to the receiver before performing this

operation. For details on connecting the antenna (aerial), refer to the supplied Operating Instructions.

FM screen

A: Frequency indication

Shows the frequency of the station which the tuner is receiving.

Hint

You can also use TUNING+/– on the remote control or on the receiver for tuning.

Select [Listen] - [FM] from the home menu.

The FM screen appears.

Select [Tuning –] or [Tuning +].

The frequency digits will begin to change on the FM screen. The receiver automatically scans the radio frequencies

and stops scanning whenever a station is received.

Repeat this step until you are tuned in to the desired station.