Help Guide (Web manual)

Help Guide

MULTI CHANNEL AV RECEIVER

STR-DH590

Selecting the Auto Calibration type [Calibration Type]

You can select a calibration type after you have performed the Auto Calibration and saved the settings.

For details on Auto Calibration, refer to the supplied Operating Instructions.

Note

This function does not work in the following cases:

[Direct] is selected and an analog input is selected.

Headphones are connected.

The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending

on the audio format.

Select [Sound Effect] - [Calibration Type] from the home menu.

Press / to select the setting you want.

Full Flat: Makes the measurement of frequency from each speaker flat.

Engineering: Sets to “the Sony listening room standard” frequency characteristics.

Front Ref.: Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.

Off