Help Guide (Web manual)

About Language Follow function
Using the sleep timer
Switching the brightness of the display panel
Saving power during standby mode
Viewing information on the display panel
Reverting to the factory default settings
Adjusting settings using the menu on the display panel
Operating the receiver with the menu on the display panel
List of settings that can be adjusted using the menu on the display panel
Level settings “<LEVEL>”
Outputting a test tone from each speaker “T. TONE”
Adjusting the output level according to the connected TV “TV.OFFSET” (TV volume offset function)
Speaker settings “<SPKR>”
Selecting the unit of measurement “DIST.UNIT”
Input settings “<INPUT>”
Switching between digital and analog audio “IN MODE”
Changing the name for each input “NAME IN”
Using other audio input jacks “A. ASSIGN”
Surround settings “<SURR>”
Selecting the HD-D.C.S. effect type “EFFECT”
Audio settings “<AUDIO>”
Synchronizing audio with video output “A/V SYNC”
Selecting the language of digital broadcasts “DUAL”
Compressing the dynamic range “D. RANGE”
HDMI settings “<HDMI>”
Controlling HDMI devices “CTRL.HDMI”
Turning off the receiver and connected devices simultaneously with the TV (System Power Off function) “STBY.LINK”
Enjoying sound of a TV compatible with the Audio Return Channel (ARC) function
Enjoying content of a connected device without turning on the receiver “STBY.THRU”
Setting the HDMI audio signal output of connected devices “AUDIO.OUT”
3