Help Guide (Web manual)

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
Setting the crossover frequency of the speakers [Crossover Freq]
You can set the bass crossover frequency of speakers for which the speaker size has been set to [Small] in the [Speaker
Setting] menu. A measured speaker crossover frequency is set for each speaker after the Auto Calibration is performed.
Note
[Crossover Freq] cannot be set when headphones are connected.
[Crossover Freq] for the particular speaker cannot be set if [Size] is set to [Large] in the [Speaker Setting] menu.
Hint
You can also set the crossover frequency of speakers from the “<SPKR>” menu on the display panel.
Related Topic
List of settings that can be adjusted using the menu on the display panel
4-731-210-11(1) Copyright 2018 Sony Corporation
Select [Speaker Setting] from the home menu.
1
Press
/ repeatedly to select [Crossover Freq].
2
Press
/ to select the speaker for which you want to adjust the crossover frequency, then press .
3
Press
/ to set the crossover frequency, then press .
4
37