Help Guide (Web manual)

Selecting the optimum sound field automatically (Sound Mode/Scene Select function) “S.F. SYNC”
Setting the level of the subwoofer “SW LVL”
BLUETOOTH settings “<BT>”
Setting the BLUETOOTH standby mode “BT STBY”
Setting BLUETOOTH audio codecs “BT AAC”
Turning the BLUETOOTH function on/off “BT POWER”
System settings “<SYSTEM>”
Setting standby mode “AUTO.STBY”
Updating the software “UPDATE”
Checking the software version “VER. X.XXX”
Troubleshooting
Error messages
PROTECT
USB FAIL
General
The receiver is turned off automatically.
Cannot find an available input when connecting several digital devices.
The receiver does not turn on even when the TV is turned on.
The receiver turns off when the TV is turned off.
The receiver does not turn off even when the TV is turned off.
Sound from connected TV
No TV sound is output from the receiver.
The sound is output from both the receiver and the TV.
No image and/or sound is output from the TV when the receiver is in the standby mode.
The sound is interrupted while watching a TV program or content on a Blu-ray Disc, etc.
The sound field switches automatically.
Sound from devices other than TV
No sound or only a very low level of sound is heard, no matter which device is selected.
No sound or only a very low level of sound is heard from specific speakers.
There is no sound from a specific device.
4