Manualshelf

Help Guide (Web manual)

ManualsBrandsSony ManualsReceivers & Amplifiers5.2ch Home Theater AV Receiver | STR-DH590
51525354555657585960
Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
Reverting to the factory default settings
You can clear all memorized settings and restore the receiver to the factory default settings by the following procedure.
Be sure to use the buttons on the receiver to perform this operation.
Note
It takes a few minutes for the memory to be cleared completely. Do not turn the receiver off until “CLEARED *” appears on the
display panel.
4-731-210-11(1) Copyright 2018 Sony Corporation
Turn off the receiver.
1
Hold down
(power) on the receiver for 5 seconds.
“CLEARING” flashes on the display panel for a while, then changes to “CLEARED *”.
2
53