Help Guide (Web manual)

Help Guide

MULTI CHANNEL AV RECEIVER

STR-DH590

Outputting a test tone from each speaker “T. TONE”

You can output a test tone from each speaker in sequence.

This operation is only available using the display panel on the front of the receiver.

Hint

To adjust the level of all speakers at the same time, press

+/–. You can also use MASTER VOLUME on the receiver.

The adjusted value is shown on the display panel during adjustment.

Related Topic

List of settings that can be adjusted using the menu on the display panel

Press AMP MENU.

Select “<LEVEL>” - “T. TONE” on the display panel.

Select the setting you want.

OFF

AUTO XXX (*): The test tone is output from each speaker in sequence.

If you need to adjust the speaker level according to the results of outputting a test tone, refer to “Adjusting the

speaker level [Level]” for how to adjust the level.

XXX represents a speaker channel (FL, CNT, FR, SR, SL, SW). The speaker channels that appear on the display panel vary depending

on the speaker pattern settings.