Help Guide (Web manual)

Help Guide

MULTI CHANNEL AV RECEIVER

STR-DH590

Switching between digital and analog audio “IN MODE”

When you connect devices to both digital and analog audio input jacks on the receiver, you can fix the audio input mode

to either device, or switch from one to the other, depending on the type of material you intend to watch.

This operation is only available using the display panel on the front of the receiver.

Note

Depending on the input, “IN MODE” may be dimmed on the display panel and other modes cannot be selected.

Hint

You can also use INPUT SELECTOR on the receiver to select the input in step 1.

Related Topic

List of settings that can be adjusted using the menu on the display panel

Press the input buttons to select the input.

Press AMP MENU.

Select “<INPUT>” - “IN MODE” on the display panel.

Select the setting you want.

AUTO: Gives priority to digital audio signals. If there are more than one digital connection, HDMI audio signals

have priority. If there is no digital audio signals, analog audio signals are selected. When TV input is selected,

priority is given to Audio Return Channel (ARC) signals. If your TV is not compatible with the Audio Return

Channel (ARC) function, digital optical audio signals are selected.

OPT: Specifies input of digital audio signals to the OPTICAL IN jack.

COAX: Specifies input of digital audio signals to the COAXIAL IN jack.

ANALOG: Specifies input of analog audio signals to the AUDIO IN (L/R) jacks.