Help Guide (Web manual)

Help Guide

MULTI CHANNEL AV RECEIVER

STR-DH590

Enjoying sound of a TV compatible with the Audio Return Channel (ARC) function

If the receiver is connected to a TV's HDMI input jack compatible with Audio Return Channel (ARC) function, you can

listen to TV sound from the speakers connected to the receiver without connecting an optical digital cable or an audio

cable. Set the receiver by the following procedure to output the sound of the TV from the speakers connected to the

receiver.

This operation is only available using the display panel on the front of the receiver.

If you connect to a TV that is not compatible with the Audio Return Channel (ARC) function or you

want to select an audio signal using a cable other than an HDMI cable (e.g. via an optical digital

cable or an audio cable)

Switch the audio input mode. For details, “Switching between digital and analog audio “IN MODE”.”

Note

Audio Return Channel (ARC) function may work on devices other than ones manufactured by Sony. However, operation is not

guaranteed.

Be sure to turn off the volume of the TV or activate the muting function of the TV.

If your TV does not support the System Audio Control function, press AMP MENU, then set “<HDMI>” - “AUDIO.OUT” to

“TV+AMP” on the display panel to output the sound of the TV from the TV speaker and the speakers connected to the receiver.