filename[D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CEL.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB02REG_STR-DN1010-CEL.fm4-174068-11(1) masterpage: Left For customers in the United States WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB02REG_STR-DN1010-CEL.fm 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB02REG_STR-DN1010-CEL.fm4-174068-11(1) Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB02REG_STR-DN1010-CEL.fm On copyrights This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. ** Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CELTOC.fm masterpage: Left Table of Contents About This Manual........................................4 Supplied accessories......................................8 Description and location of parts...................9 Connections 1: Installing the speakers .............................19 2: Connecting the speakers ..........................21 3: Connecting the TV ..................................23 4a: Connecting the audio components.........
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CELTOC.fm masterpage: Right S-AIR Operations About S-AIR products ................................ 75 Setting up an S-AIR product....................... 76 Enjoying the system’s sound in another room ....................................................... 80 Changing the channel for better sound transmission ........................................... 81 Stabilizing S-AIR reception ........................
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CELTOC.fm Supplied accessories • • • • Operating Instructions (this manual) Quick Setup Guide GUI Menu List FM wire antenna (aerial) (1) • AM loop antenna (aerial) (1) masterpage: Left Inserting batteries into the remote Insert two R6 (size-AA) batteries in the RM-AAP051 (Models of area code U2, CA2 only) or RM-AAP052 (Models of area code CEK, ECE, AU1, TW2 only) Remote Commander. Observe the correct polarity when installing batteries.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.fm masterpage: Right Description and location of parts Front panel 1 qh 2 3 qg 4 qf 5 qd 6 qs qa 7 0 8 9 Name and function Name and function A ?/1 (on/standby) Turns the receiver on or off (page 37, 55, 69). G MUTING Turns off the sound temporarily. Press MUTING again to restore the sound (page 47, 122). B Remote sensor Receives signals from remote commander. C White indicator Lights up when the receiver is on.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.fm masterpage: Left Name and function L DIMMER Adjusts the brightness of the display (page 111). M INPUT MODE Selects the input mode when the same components are connected to both digital and analog jacks (page 84). N 2CH/A.DIRECT, A.F.D., MOVIE, MUSIC Selects a sound field (page 65, 66). O SPEAKERS Selects the front speaker system (page 37). P PHONES jack Connects to headphones (page 122).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.fm masterpage: Right About the indicators on the display 1 2 LH SW RH L C R SL S SR 3 4 5 6 7 8 9 ARC D + EX TrueHD NEO 6 PL ll x z ANALOG HDMI COAX OPT S –AIR EQ RDS CAT MEM DTS – HD MSTR HI RES LBR LF E D.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.fm masterpage: Left Indicator and explanation Indicator and explanation K SLEEP Lights up when the Sleep Timer is activated. R Playback channel indicators The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes or upmixes the source sound (based on the speaker pattern settings). L LPCM Lights up when Linear PCM (Pulse Code Modulation) signals are decoded.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.fm masterpage: Right Rear panel 1 8 2 3 6 7 6 A S-AIR section EZW-T100 slot 5 D DIGITAL INPUT/OUTPUT section Connects to a wireless transmitter (not supplied) (page 35). B DMPORT section DMPORT jack 4 Connects to a Sony DIGITAL MEDIA PORT adapter (page 24). OPTICAL IN jacks COAXIAL IN jack HDMI IN/ OUT* jacks C ANTENNA section FM ANTENNA jack Connects to the supplied FM wire antenna (aerial) (page 35).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.fm F AUDIO INPUT/OUTPUT section AUDIO IN/ White (L) OUT jacks Connects to a Super Audio CD player, etc. (page 23, 24). Red (R) Black AUDIO OUT Connects to a jack subwoofer (page 21). G VIDEO/AUDIO INPUT/OUTPUT section AUDIO IN/ White (L) OUT jacks Red (R) Yellow Connects to a VCR, Blu-ray disc player, etc. (page 30, 32, 33).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.fm masterpage: Right Name and function wg wf wd ws A ?/1 (on/standby) 1 2 3 Turns the receiver on or sets it to the standby mode. To turn off all components, press ?/1 and AV ?/1 (B) at the same time (SYSTEM STANDBY). Saving the power in standby mode. When “Ctrl for HDMI” is set to “OFF” (page 70) and “S-AIR Stby” is set to “OFF” (page 83).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.fm Name and function Name and function ENTERa) Press SHIFT (V), then press ENTER to enter the value after selecting a channel, disc or track using the numeric buttons. To enter the value of Sony TV, press TV (W) and then press ENTER. MEMORY Press SHIFT (V), then press MEMORY to store a station during tuner operation. /a) (Text) (RM-AAP052 only) Press TV (W), then press / to display text. E SOUND FIELD +/– Selects a sound field (page 65).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.fm Name and function O TV Name and function VOL +/–a) a) (RM-AAP051 only) +/– (RM-AAP052 only) Press TV (W), then press TV VOL +/– or +/– to adjust the TV volume level. MASTER VOL +/–a) (RM-AAP051 only) +/–a) (RM-AAP052 only) Adjust the volume level of all speakers at the same time. P DISC SKIPa) Skips disc when using a multi-disc changer.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB03DES_STR-DN1010-CEL.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right Connections Connections 1: Installing the speakers This receiver allows you to use a 7.1 channel system (7 speakers and one subwoofer). Example of speaker system configuration To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer (5.1 channel).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left Tips • When you connect a 7.1 channel speaker system with two surround back speakers, all angle A should be the same. • When you connect a 7.1 channel speaker system with two front high speakers, place the front high speakers – at an angle between 22° to 45°. – at least 3.3 feet (1 meter) directly above the front speakers. • When you connect a 6.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right 2: Connecting the speakers Connections Before connecting cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left a) Notes on the SPEAKERS SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals connection. – If you connect only one surround back speaker, connect it to L of this terminals. – If you are not using surround back speaker or front high speakers, and you have an additional front speaker system, connect the additional front speaker system to this terminals. Set “SB Assign” to “Speaker B” in the Speaker Settings menu (page 91).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right 3: Connecting the TV It is not necessary to connect all the cables. Connect audio and video cords according to the jacks of your components. Before connecting cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left a) To enjoy TV multi channel surround sound broadcasting from the speakers connected to the receiver, connect C or E. Be sure to turn off the TV’s volume or activate the TV’s muting function. b) If your TV is compatible with the Audio Return Channel (ARC) function, the TV sound will output from the speakers connected to the receiver via HDMI TV OUT connection.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm A TV* Connections Super Audio CD player, CD player, CD recorder masterpage: Right B DIGITAL MEDIA PORT adapter A Audio cord (not supplied) B Video cord (not supplied) * You can enjoy the images from the components connected to the DIGITAL MEDIA PORT adapter when you connect the TV to the receiver.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left 4b: Connecting the video components Components to be connected Connect your video components according to the table below. Component Page Blu-ray disc player* 27, 30 DVD player* 27, 31 DVD recorder* 27, 31 Satellite tuner*, Cable TV tuner* 27, 32 “PlayStation 3” 27 Video input/output jacks to be connected The image quality depends on the connecting jack. See the illustration that follows.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right Connections Connecting components with HDMI jacks HDMI is the abbreviated name for HighDefinition Multimedia Interface. It is an interface which transmits video and audio signals in digital format. Sony recommends that you connect components to the receiver using an HDMI cable. By connecting Sony “BRAVIA” Synccompatible components using HDMI cables, operations can be simplified. See ““BRAVIA” Sync Features” (page 70).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Satellite tuner, Cable TV tuner DVD player, DVD recorder Audio/video signals Audio/video signals A masterpage: Left Blu-ray disc player Audio/video signals A A A Audio/video signals “PlayStation 3” A Audio/video signals ARC TV, etc.* A HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable. * For details on the audio connection of TV to the receiver, see page 23.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Notes on connecting cables Notes on HDMI connections • An audio signal input to the HDMI IN jack is output from the SPEAKERS jacks, HDMI TV OUT jack and PHONES jack. It is not output from any other audio jacks. • Video signals input to the HDMI IN jack can only be output from the HDMI TV OUT jack. The video input signals cannot be output from the VIDEO OUT jacks or MONITOR OUT jacks.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left Connecting a Blu-ray disc player The following illustration shows how to connect a Blu-ray disc player.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right Connecting a DVD player, DVD recorder Connections The following illustration shows how to connect a DVD player or DVD recorder.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left Connecting a satellite tuner, cable TV tuner The following illustration shows how to connect a satellite tuner or cable TV tuner.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right Connecting components with analog video and audio jack DVD recorder, VCR Audio signals A Video signals B (On the front panel) Camcorder, video game C A Audio cord (not supplied) B Video cord (not supplied) C Audio/video cord (not supplied) Notes • Be sure to change the initial setting of the VIDEO 1 input button on the remote so that you can use the button to control your DVD recorder.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left Function for conversion of video signals This receiver is equipped with a function for converting video signals. Video signals and component video signals can be output as HDMI video signals (HDMI TV OUT jack only). INPUT jack OUTPUT jack HDMI IN HDMI TV OUT COMPONENT VIDEO IN COMPONENT VIDEO MONITOR OUT VIDEO IN MONITOR VIDEO OUT : Same type of signal as that of the input signal is output.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right 6: Inserting the wireless transmitter/transceiver Connect the supplied AM loop antenna (aerial) and FM wire antenna (aerial). Before connecting the antennas (aerials), be sure to disconnect the AC power cord (mains lead). To use the S-AIR function, you need to insert the wireless transmitter (not supplied) into the S-AIR main unit and the wireless transceiver (not supplied) into the S-AIR sub unit.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left 2 Insert the wireless transmitter. EZW-T100 slot 7: Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. Notes Wireless transmitter Notes • Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. • Connect the AC power cord (mains lead) firmly.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Preparing the Receiver Initializing the receiver Selecting the front speaker system You can select the front speakers you want to drive. Be sure to use the buttons on the receiver for this operation. SPEAKERS ?/1 Press SPEAKERS repeatedly to select the front speaker system you want to drive. 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. After “CLEARING” appears on the display for a while, “CLEARED!” appears.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Calibrating the appropriate speaker settings automatically (Auto Calibration) This receiver is equipped with DCAC (Digital Cinema Auto Calibration) function which allows you to perform automatic calibration as follows: • Check the connection between each speaker and the receiver.a) • Adjust the speaker level. • Measure the distance of each speaker from your listening position.a)b) • Measure the speaker size.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm 1: Setting up the Auto Calibration On setting up the active subwoofer • When a subwoofer is connected, turn on the subwoofer and turn up the volume beforehand. Turn the MASTER VOLUME to just before the mid-point. • If you connect a subwoofer with a crossover frequency function, set the value to maximum. • If you connect a subwoofer with an auto standby function, set it to off (deactivated).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm 2: Performing Auto Calibration ?/1 masterpage: Left 4 Press V/v repeatedly to select “Auto Cal. Start”, then press or b. 5 6 Press to select “START”. The measurement starts in five seconds. Input buttons Auto Calibration Count Down Please press enter key to stop. 5 CANCEL RETURN GUI MODE V/v/b, MENU 7 Measurement starts. The measurement process will take approximately 30 seconds with a test tone.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm To cancel Auto Calibration 2 Press V/v repeatedly to select the item you want, then press . Item and explanation Retry Performs the Auto Calibration again. Save Saves the measurement results and exits the setting process. Warning Displays warning concerning the measurement results. See “Message list after Auto Calibration measurement” (page 43). Phase* Displays the phase of each speaker (in phase/ out of phase).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm 4 masterpage: Left Select the Auto Calibration Type. Press V/v repeatedly to select “Auto Cal. Type”, then press . Auto Calibration Auto Cal. Type Full Flat Engineer Front Reference Off RETURN Calibration type and explanation Full Flat Makes the measurement of frequency from each speaker flat. Engineer Sets the frequency to one that matches that of the Sony listening room standard.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right Message list after Auto Calibration measurement Display and explanation Error Code 31 The SPEAKERS is set to off. Set it to others and perform the Auto Calibration again. Error Code 33 • None of the front speakers are connected or only one front speaker is connected. • The optimizer microphone is not connected. • Either the surround left or surround right speaker is not connected.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm 2 Guide to on-screen display operation masterpage: Left Press V/v repeatedly to select a menu you want, then press . The menu item list appears on the TV screen. Example: When you select “Settings”. You can display the menu of the receiver on the TV screen and select the function you want to use on the TV screen by pressing V/v/B/b and on the remote.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Overview of the main menus Menu icon 2 Description Input Selects the input source component connected to the receiver (page 46). The menu item list appears on the TV screen. Example: when you select “Input”. Selects the music from the audio component connected to the DIGITAL MEDIA PORT adapter (page 48). Video BD Selects the images from the video components connected to the DIGITAL MEDIA PORT adapter (page 48).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm 3 Basic Operations Playback masterpage: Left Press V/v repeatedly to select the component you want, then press . The selected input appears on the TV screen. 4 Turn on the component and start playback. 5 Press MASTER VOL +/– (RM-AAP051 only) or 2 +/– (RM-AAP052 only) to adjust the volume. ?/1 Input buttons You can also use MASTER VOLUME on the receiver.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right To activate the muting function To cancel naming input Press MUTING (RM-AAP051 only) or (RM-AAP052 only) on the remote. You can also use MUTING on the receiver. The muting function will be canceled when you do the following. • Press MUTING (RM-AAP051 only) or (RM-AAP052 only) again. • Increase the volume. • Turn off the receiver. • Perform Auto Calibration. Press RETURN/EXIT O.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm SIRIUS Satellite Radio (Models of area code U2, CA2 only) Channel name t Channel number t Category name t Artist name/Feature t Song/program title t Composer name t Signal strength t Sound field type t Volume level a) Index name appears only when you have assigned one to the input or preset station (page 56). Index name does not appear when only blank spaces have been entered or it is the same as the input name.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm If the option menu does not appear on the screen, refer to the operating instructions of the connected component. When an adapter other than iPod is connected, a hierarchical menu does not appear. Selecting the operation screen You can select an operation screen using the GUI menu, depending on the DIGITAL MEDIA PORT adapter you want to use.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Contents list for audio iPod Playlists > Playlist > Track Artists > Artist > Album > Track Albums > Album > Track Songs > Track masterpage: Left Playing the selected track During playback of the selected track, the displayed screen changes depending on the DIGITAL MEDIA PORT adapter connected.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Selecting the playback mode 1 Press TOOLS/OPTIONS. The option menu appears. 3 4 Press V/v repeatedly to select “Repeat”, “Shuffle”, “List Mode” or “Audiobook”, then press or b. Press V/v repeatedly to select the mode you want to select from the following, then press . x Repeat (TDM-iP50 only) • OFF • One • All x Shuffle (TDM-iP50 only) DIGITAL MEDIA PORT message list Message and explanation No Adapter The adapter is not connected.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. AMP masterpage: Left Recording using the receiver You can record from a video/audio component using the receiver. Refer to the operating instructions supplied with your recording component. Recording onto a CD-R You can record onto a CD-R using the receiver. Refer to the operating instructions supplied with your CD recorder.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Recording onto a recording media 1 2 Listening to FM/AM radio You can also use INPUT SELECTOR +/– on the receiver. You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas (aerials) to the receiver (page 35). Prepare the playback component for playing. Prepare the recording component.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Tuning into a station automatically (Auto Tuning) 1 Press GUI MODE. After “MENU ON” appears on the display for a while, “GUI” appears and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 2 Press V/v repeatedly to select “FM” or “AM”, then press or b. Tuning into a station directly (Direct Tuning) You can enter the frequency of a station directly by using the numeric buttons.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Changing the AM tuning scale (Models of area code U2, CA2 only) You can change the AM tuning scale to either 9 kHz or 10 kHz on the receiver. ?/1 masterpage: Right Presetting FM/AM radio stations (Preset Tuning) You can preset up to 30 FM and 30 AM stations. Then you can easily tune in the stations you often listen to. GUI MODE V/v/b, MENU 1 Press ?/1 to turn off the receiver.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm 6 Press V/v repeatedly to select a preset number, then press . The station is stored as the selected preset number. 7 Repeat steps 3 to 6 to preset another station. You can store station as follows: • AM band: AM 1 to AM 30 • FM band: FM 1 to FM 30 Tuning to preset stations Repeat steps 1 and 2 of “Presetting FM/AM radio stations (Preset Tuning)”. 2 Press V/v repeatedly to select the preset station you want.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Listening to Satellite Radio (Models of area code U2, CA2 only) To listen to Satellite Radio, you’ll need to connect a SIRIUS Satellite Radio tuner (sold separately) to your Sirius-Ready receiver. SIRIUS Satellite Radio is available to residents of the US (except Alaska and Hawaii) and Canada. masterpage: Right SIRIUS and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Connecting the SIRIUS Satellite Radio masterpage: Left Preparing to listen to the SIRIUS Satellite Radio Connect the SiriusConnect Home tuner. When you use the SiriusConnect Home tuner with this receiver, be sure to connect the AC power adaptor supplied with the tuner to a wall outlet. GUI MODE V/v/b, SIRIUS jack TOOLS/ OPTIONS MENU Checking the SIRIUS Radio ID 1 Press GUI MODE.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Checking receiving conditions (Antenna Aiming) 1 Press GUI MODE. Selecting a channel of the SIRIUS Satellite Radio SHIFT After “MENU ON” appears on the display for a while, “GUI” appears and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. Press V/v repeatedly to select “SR”, then press or b. 3 Press TOOLS/OPTIONS, then press V/v repeatedly to select “Antenna”, then press or b.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm 3 Press V/v repeatedly to select the category, then press or b. • All: You can select a channel from all the categories. • (category name): You can select a channel from one category. Selecting a channel by inputting the channel number directly (Direct Tuning) 1 4 Press V/v repeatedly to select the channel, then press . The selected channel is being received. The channel information is displayed on the TV screen.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Presetting SIRIUS Satellite Radio channels 6 7 V/v/b, Repeat steps 3 to 6 to preset another channel. Selecting the channel by using the preset numbers MENU Presetting channels using the preset numbers 1 Press GUI MODE. After “MENU ON” appears on the display for a while, “GUI” appears and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm Restricting access to specific channels 4 You can restrict access to certain channels using your own lock code. The lock code is set to “0000” as the default. Change the lock code before you use this function for the first time. See “To change the lock code (Lock Code)” (page 62). SHIFT Numeric buttons Press V/v repeatedly to select “ON”, then press . “Enter your 4-digit lock code.” appears.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right To listen to the locked channels 1 Select a locked channel you want to listen to using Direct Tuning (page 60). “Enter your 4-digit lock code.” appears. 2 Press SHIFT, then press the numeric buttons to enter your 4-digit lock code. The channel is tuned in. To cancel the Parental Lock 1 Select a channel you want to unlock using Direct Tuning (page 60). Tuner Operations 2 Press TOOLS/OPTIONS. The option menu appears.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left SIRIUS Satellite Radio message list Message appears on TV screen [Display] Explanation Remedies Antenna [ANTENNA] The antenna is not connected properly. Check the connection between the SiriusConnect Home tuner and the antenna. Acquiring [ACQUIRING] The receiving condition is not good. Try moving the antenna to another location.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right Note Enjoying Surround Sound Selecting the sound field This receiver can create multi channel surround sound. You can select one of the optimized sound fields from the receiver’s preprogrammed sound fields. . SOUND FIELD +/– You cannot select “Analog Direct” when you select DVD, DMPORT and HDMI 1-4 as input. Auto Format Direct (A.F.D.) mode The Auto Format Direct (A.F.D.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm x C.ST.EX C (Cinema St EX C DCS ) Reproduces the sound characteristics of the Sony Pictures Entertainment scoring stage. This mode is ideal for watching musicals or films where orchestra music is featured in the soundtrack. masterpage: Left x HALL (Hall) Reproduces the acoustics of a classical concert hall. x JAZZ (Jazz Club) Reproduces the acoustics of a jazz club. x CONCERT (Live Concert) x V.MULTI DIM. (V.M.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm When headphones are connected You can only select this sound field if the headphones are connected to the receiver. x HP 2CH (HP (2 ch)) This mode is selected automatically if you use headphones (except Analog Direct). Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channels except LFE signals.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left When connecting Blu-ray disc players and other next generation HD players Digital audio formats that this receiver can decode depend on digital audio input jacks for the components connected. This receiver supports the following audio formats. Audio format Maximum number of channels Connection of the playback component and the receiver COAXIAL/OPTICAL HDMI Dolby Digital 5.1 a a Dolby Digital EX 6.1 a a a) 7.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Enjoying the surround effect at low volume levels (NIGHT MODE) masterpage: Right Resetting sound fields to the initial settings Be sure to use the buttons on the receiver for this operation. ?/1 This function allows you to retain a theater like environment at low volume levels. This function can be used with other sound fields. When watching a movie late at night, you will be able to hear the dialog clearly even at a low volume level.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm “BRAVIA” Sync Features What is “BRAVIA” Sync? “BRAVIA” Sync is compatible with Sony TV, Blu-ray disc/DVD player, AV amplifier, etc., that is equipped with the Control for HDMI function.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm If your TV is not compatible with the “Control for HDMI-Easy Setting” function GUI MODE V/v/b, MENU masterpage: Right Notes • Before you do the “Control for HDMI-Easy Setting” from the TV, be sure to turn on the TV, connected components and receiver. • If the playback components cannot function after you have made the settings for “Control for HDMIEasy Setting”, check the Control for HDMI setting on your TV.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Playing back components with one-touch operation (One-Touch Play) By a simple operation (one-touch), components connected to the receiver with HDMI connections start automatically. You can enjoy the sound/image using connected components. When you set “Pass Through” to “AUTO” or “ON”, sound and image can be output only from the TV while the receiver remains in standby mode.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Turning off the receiver with the TV (System Power Off) When you turn the TV off by using the POWER button on the TV’s remote, the receiver and the connected components turn off automatically. You can also use the receiver’s remote to turn off the TV. AV ?/1 TV Press TV, then press AV ?/1. Notes • Set the TV Standby Synchro to “ON” before using the System Power Off function. For details, refer to the operating instructions of the TV.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left Notes Enjoying the TV sound via an HDMI cable (Audio Return Channel) • This function does not work when you set “Ctrl for HDMI” to “OFF” in the HDMI Settings menu. • This function is only available when – your TV is compatible with Audio Return Channel (ARC) function. – INPUT MODE is set to “AUTO”.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm S-AIR Operations Room B S-AIR sub unit (S-AIR receiver) About S-AIR products Room A S-AIR main unit (this receiver) S-AIR sub unit (surround amplifier) S-AIR Operations This receiver is compatible with the S-AIR function (page 119), which allows wireless sound transmission between S-AIR products. There are two types of S-AIR product. • S-AIR main unit (this receiver): The S-AIR main unit is for transmitting sound.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm About environments where S-AIR products (S-AIR main unit and sub unit) are used S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may cause lost connection or instability in S-AIR reception. • Electronic equipment influence The following may cause interference or cross talk.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Establishing sound transmission between the S-AIR main unit and S-AIR sub unit (ID setting) When you match the ID of the S-AIR main unit and the S-AIR sub unit, you can establish sound transmission. You can use multiple S-AIR main unit by setting a different ID for each unit. masterpage: Right 8 Set the S-AIR sub unit to the same ID.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm To use multiple S-AIR main units x Before pairing You can use multiple S-AIR main units by setting a different ID for each component. Sound transmission is established as follows (example): S-AIR main unit (this receiver) masterpage: Left Sound transmission is established by the ID (example).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm To perform pairing 1 2 Press GUI MODE. After “MENU ON” appears on the display for a while, “GUI” appears and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 4 Press V/v repeatedly to select “Settings”, then press or b. 5 9 Press B/b repeatedly to select “Finish” or “Continue”, then press . • “Finish”: Finishes pairing.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Enjoying the system’s sound in another room (For the S-AIR receiver only (not supplied)) You can enjoy the system’s sound in another room by using the S-AIR receiver. The S-AIR receiver can be placed in another room for enjoying the system’s sound there. For details of the S-AIR receiver, refer to the operating instructions supplied with the S-AIR receiver. 2 3 Press V/v repeatedly to select “Settings”, then press or b.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm 8 Select the desired input on the S-AIR receiver. x When “Party” is set The S-AIR receiver’s input changes sequentially as you change the input on the S-AIR main unit or S-AIR receiver. x When “Separate” is set The S-AIR receiver’s input changes by pressing S-AIR CH of the S-AIR receiver. Note Changing the channel for better sound transmission If you use multiple wireless systems which share the 2.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm 4 Press V/v repeatedly to select “RF Change”, then press or b. 5 Press V/v repeatedly to select the setting you want, then press . • AUTO: Normally select this. The system changes “RF Change” to “ON” or “OFF” automatically. • ON: The system transmits sound by searching for a better channel for transmitting. • OFF: The system transmits sound by fixing the channel for transmitting. 6 Press GUI MODE. The GUI menu turns off.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm • Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is the most stable. – Place so that the wireless adapters of the S-AIR main unit and sub unit are closer.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm 5 Press V/v repeatedly to select the setting you want. • ON: You can enjoy the S-AIR receiver while the S-AIR main unit is in standby mode or turned on. • OFF: You cannot enjoy the S-AIR receiver while the S-AIR main unit is in standby mode. To exit the menu Press MENU. Notes • When you set “S-AIR Stby” to “ON”, the power consumption increases during the standby mode.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right Notes • Some audio input modes may not be set up depending on the input. • When either the HDMI 1-4 input, DMPORT input or SIRIUS* is selected, “------” appears on the display, and you cannot select other modes. Select an input mode other than the HDMI 1-4 input, DMPORT input or SIRIUS* then set the audio input mode. • When “Analog Direct” is being used, audio input is automatically set to “ANALOG”.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm 4 masterpage: Left Press TOOLS/OPTIONS. BD Input DVD SAT/CATV Input Assign Name lnput TV VIDEO 1 5 Press V/v repeatedly to select “Input Assign”, then press or b. The “Input Assign” screen appears. 6 Select the audio and/or video signals you want to assign to the input which you selected in step 3 using V/v/B/b. Input Assign Select Video Select Audio COMP.2 SAT OPT COMP.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right Input name BD DVD SAT/CATV VIDEO 1 VIDEO 2 SA-CD/CD/ CD-R Assignable COMP.1 video input COMP.2 jacks COMP.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left Notes Using a bi-amplifier connection 1 Press GUI MODE. After “MENU ON” appears on the display for a while, “GUI” appears and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 2 • Set “SB Assign” to “BI-AMP” before you perform Auto Calibration.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Using the setting menu 2 You can adjust various settings for speakers, surround effects, etc. using the setting menu. To display the menu of the receiver on the TV screen, make sure that the receiver is in “GUI MODE” by following the steps in “To turn “GUI MODE” on and off” (page 44). masterpage: Right Press V/v repeatedly to select “Settings”, then press or b to enter the menu mode. The Setting menu list appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left Setting menu list Menu Description Auto Cal. Sets the speaker level or distance and makes the measurement automatically (page 90). Speaker Sets the speaker position manually (page 91). Surround Adjusts the sound field (surround effect) you choose (page 95). EQ Adjusts the equalizer (bass/ treble sound) (page 96). Audio Sets various sound items (page 96).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm To register settings for the listening environment You can select the seating position you want and register the measurement results of the Auto Calibration for that seating position. 1 Press V/v repeatedly to select “Position”, then press or b. 2 Press V/v repeatedly to select the position (Position 1, 2, 3) for which you want to register the measurement result, then press . 3 Press V/v repeatedly to select “Auto Cal.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left • OFF If you do not use “Speaker B” or “BI-AMP”, select “OFF”. To adjust the distance from the seating position to each speaker Note You can adjust the distance from the listening position to each speaker (front left/right, front left/right high, center, surround left/right, surround back left/right, subwoofer).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm 3 Press V/v repeatedly to set the size of the selected speaker, then press . • Large If you connect large speakers that will effectively reproduce bass frequencies, select “Large”. Normally, select “Large”.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left To output test tone from adjacent speakers When a test tone is not output from the speakers You can output test tone from adjacent speakers so that you can adjust the balance between the speakers. • The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. • The speaker cords may have the short-circuit problem.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right Tips • Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal. • “STD” is the standard setting, but it only enacts light compression. Therefore, we recommend using the “MAX” setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left EQ Settings menu Audio Settings menu You can use the following parameters to adjust the tonal quality (bass/trebel level) of front speakers. You can make settings for the audio to suit your preference. Bass Treble Level (dB) Frequency (Hz) A/V Sync (Synchronizes audio with video output) Lets you delay the output of audio to minimize the time gap between audio output and visual display.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Dec. Priority (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks or HDMI IN jacks. x AUTO Automatically switches the input mode between DTS, Dolby Digital, or PCM. x PCM When signals from the DIGITAL IN jack are selected, PCM signals are given priority (to prevent interruption when playback starts).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Comp.Dec. (Component video decoder) If the image is distorted when you connect to video game, set “Comp.Dec.” to “ON”. This setting is only applicable for component video input signals. x ON x OFF masterpage: Left HDMI Settings menu You can make the required settings for components connected to the HDMI jack. Ctrl for HDMI (Control for HDMI) Lets you turn the Control for HDMI function on or off.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Notes • This parameter is not available when “Ctrl for HDMI” is set to “OFF”. • When “AUTO” is selected, it may take a little more time for the image and sound to be output to the TV than when “ON” is selected. • When the receiver is in standby mode, “A.STANDBY” appears on the display if “Pass Through” is set to “AUTO” or “ON”. However, “A.STANDBY” will disappear when “Pass Through” is set to “AUTO” and no signals are detected.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm ARC (Audio Return Channel) Lets you enjoy the TV sound from the speakers connected to the receiver via an HDMI cable. For details, see “Enjoying the TV sound via an HDMI cable” (page 74). x ON masterpage: Left System Settings menu You can customize the settings of the receiver.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Operating without connecting to a TV You can operate this receiver using the display even if you do not use a GUI when a TV is not connected. AMP masterpage: Right 4 Press V/v repeatedly to select the parameter you want to adjust, then press or b. 5 Press V/v repeatedly to select the setting you want, then press . To return to the previous display Press B or RETURN/EXIT O. To exit the menu Press MENU.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 101. Menu [Display] Parameters [Display] Settings Initial setting FULL FLAT, ENGINEER, FRONT REF, OFF FULL FLAT Position [POSITION] POS 1, POS 2, POS 3 POS 1 Naming position [NAME IN] For details, see “Name Input (Naming position)” (page 91).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Menu [Display] Speaker settings [] masterpage: Right Settings Initial setting Subwoofer levela) [SW LEVEL] SW –20.0 dB to SW +10.0 dB (0.5 dB per step) SW 0 dB Dynamic range compression [D. RANGE] COMP. MAX, COMP. STD, COMP. AUTO, COMP. OFF COMP. AUTO Speaker pattern [SP PATTERN] 5/2.1, 5/2, 4/2.1, 4/2, 3/4.1, 3/4, 2/4.1, 3/4.1 2/4, 3/3.1, 3/3, 2/3.1, 2/3, 3/2.1, 3/2, 2/2.1, 2/2, 3/0.1, 3/0, 2/0.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Menu [Display] Parameters [Display] Settings Initial setting Subwoofer distancea) [SW DIST.] SW 3’3” to SW 32’9” (SW 1.00 m to SW 10.00 m) (1 inch (0.01 m) step) SW 9’10” (SW 3.00 m) Distance unit [DIST.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right Menu [Display] Parameters [Display] Settings Initial setting Audio settings [
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Performing Auto Calibration For details on the Auto Calibration, see “Calibrating the appropriate speaker settings automatically (Auto Calibration)” (page 38). See “Before you perform Auto Calibration” (page 38) before performing the Auto Calibration. To operate on the receiver 1 Press GUI MODE repeatedly to select “MENU OFF”. 2 Press AMP. Receiver operation is enabled. 3 Press MENU.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm 2 View the measurement result. Press AMP and then press V/v repeatedly to select the item. Then press . Item and explanation EXIT Exits the setting process without saving the measurement results. LEVEL INFO. Displays the measurement result for speaker level. masterpage: Left 5 Disconnect the optimizer microphone after you have finished.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm 2 Press to return to step 2 in “To confirm/save Auto Calibration results when GUI function is turned off” (page 107). Presetting radio stations 1 Tip Depending on the position of the subwoofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value. 2 3 4 press D.TUNING. 2 Press SHIFT, then press numeric buttons to enter the frequency. 3 Press .
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Listening to satellite tuner (Models of area code U2, CA2 only) For details on SIRIUS Radio service, see “Listening to Satellite Radio” (page 57) in “Tuner Operations”. Aiming the SIRIUS Antenna You can use “SR ANT AIM” in the Tuner Settings menu to help you aim the antenna for optimal signal reception. 1 Press TUNER repeatedly to select “SIRIUS”. You can also use INPUT SELECTOR +/– on the receiver. 2 Press AMP. 3 Press MENU.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm Presetting satellite tuner channels (Models of area code U2, CA2 only) 1 2 Select a channel you want to preset. Changing the brightness of the front panel display (DIMMER) You can change the brightness of the front panel display. Press AMP. For details on this operation, see “Selecting channels from a category (CATEGORY TUNING)” (page 110). 1 2 3 Press SHIFT, then press MEMORY.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB06REM_STR-DN1010-CEL.fm 3 Using the Remote Programming the remote You can customize the remote to match the components connected to your receiver. You can even program the remote to control nonSony components and also Sony components that the remote is normally unable to control. Before you begin, note that: – You cannot change the settings of DMPORT input buttons. – The remote can control only components that accept infrared wireless control signals.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB06REM_STR-DN1010-CEL.fm If programming is unsuccessful, check the following: • If the indicator does not light up in step 1, the batteries are weak. Replace both batteries. • If the indicator flashes 5 times in quick succession while entering the numeric code, an error has occurred. Start again from step 1.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB06REM_STR-DN1010-CEL.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB06REM_STR-DN1010-CEL.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB06REM_STR-DN1010-CEL.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm masterpage: Right x Crossover frequency Additional Information Glossary x Cinema Studio EX A surround sound mode that can be regarded as the compilation of Digital Cinema Sound technology, delivers the sound of a dubbing theater using three technologies: “Virtual Multi Dimensions”, “Screen Depth Matching”, and “Cinema Studio Reverberation”.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm x Dolby Digital Plus Dolby Digital Plus provides the flexibility and efficiency to deliver more channels of compelling surround sound for high-definition video media. Its superior coding efficiencies enable up to 7.1 channel of high-quality multi channel audio without negatively impacting bit budgets allocated for video performance or additional feature sets.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm masterpage: Right x DTS-HD x Interlace Audio format which extends the conventional DTS Digital Surround format. This format consists of a core and an extension, and the core part has DTS Digital Surround compatibility. There are two kinds of DTS-HD, DTS-HD High Resolution Audio and DTS-HD Master Audio.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm masterpage: Left x Sampling frequency To convert analog audio to digital, analog data should be quantified. This process is called sampling, and the number of times per second the analog data is quantified is called the sampling frequency. A standard music CD stores data quantified at 44,100 times per second, which is expressed as a sampling frequency of 44.1 kHz.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm masterpage: Right On S-AIR function • Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. • Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock. • Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Audio There is no sound, no matter which component is selected, or only a very low-level sound is heard. • Check that the speakers and components are connected securely.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm There is no sound from digital sources (from COAXIAL or OPTICAL input jack). • Check that the INPUT MODE is set to “AUTO” (page 84). • Check that the “Analog Direct” is not being used. • Check that the selected digital audio input jack is not assigned to other inputs in “Input Assign” in the Input Option menu (page 85). • Set “ARC” to “ARC OFF” when no sound is output from TV OPTICAL IN jack during TV input (page 100).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm Dolby Digital or DTS multi channel sound is not reproduced. • Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the setting for the digital audio output of the connected component is available.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm The GUI menu does not appear on the TV screen. • Press GUI MODE repeatedly to select “MENU ON”. If the GUI menu still does not appear on the TV screen, press MENU. • Check that the TV is connected correctly. HDMI The source sound input from the HDMI jack on the receiver is not output from the speakers connected to the receiver or TV speaker. • Check the setting of “Audio Out” in the HDMI Settings menu (page 98).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm The TV’s remote cannot be used to control the connected component when using the Control for HDMI function. • Depending on the connected component and TV, you may need to set up the component and TV. Refer to the operating instructions supplied with each component and TV. • Change the input of the receiver to the HDMI input connected to the component. When the receiver is in standby mode, there is no image or sound output from the TV.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm No sound is heard from the S-AIR product. • If you use another S-AIR main unit, place it more than 26 feet (8 meters) away from this S-AIR main unit. • Confirm the ID of the S-AIR main unit and S-AIR sub unit are the same (page 77). • Confirm the pairing setting (page 78). • Place the S-AIR main unit and S-AIR sub unit closer to each other. • Avoid using the equipment that generates electromagnetic energy, such as a microwave oven.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm Radio stations cannot be tuned in. • Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) and connect an external antenna (aerial), if necessary. • (Models of area code U2, CA2 only) Keep the satellite radio antenna, away from the speaker cords and the power cord to avoid picking up noise. • The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm For other messages, see “Message list after Auto Calibration measurement” (page 43), “DIGITAL MEDIA PORT message list” (page 51) and “SIRIUS Satellite Radio message list” (page 64). If you are unable to remedy the problem using the troubleshooting guide Clearing the receiver’s memory may remedy the problem (page 37).
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm 1) Measured under the following conditions: AM tuner section Area code Power requirements Tuning range U2, CA2 120 V AC, 60 Hz Area code CEK, ECE, AU1 230 V AC, 50 Hz TW2 110 V AC, 60 Hz 2) Reference power output for front, center, surround, surround back and front high speakers. Depending on the sound field settings and the source, there may be no sound output. Frequency response Analog 10 Hz – 70 kHz, +0.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB07ADD_STR-DN1010-CEL.fm masterpage: Right General Power requirements Area code Power requirements U2, CA2 120 V AC, 60 Hz ECE, CEK 230 V AC, 50/60 Hz AU1 230 V AC, 50 Hz TW2 110 V AC, 60 Hz Power output (DIGITAL MEDIA PORT) DC OUT: 5V, 0.7A MAX Power consumption Area code Power consumption U2, CA2, CEK, ECE, AU1, TW2 250 W Power consumption (during standby mode) 0.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CELIX.fm masterpage: Left Index Numerics D L 2 channel 65 5.1 channel 19 7.1 channel 19 DCAC (Digital Cinema Auto Calibration) 38 Decode Priority 97, 105 DIGITAL MEDIA PORT 48 DIMMER 111 Direct Tuning 54, 60, 109, 110 Display 11 Distance Unit 95, 103 Dolby Digital EX 68 Dual Mono 96, 105 DVD player 28, 31 DVD recorder 33 Dynamic range compression 94, 102 Level settings 102 LFE (Low Frequency Effect) 12 Lock Code 62 A A.F.D.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CELIX.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CELIX.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CELIX.
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CELIX.