D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\010COV.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\020REG.fm4583-748-16(1) For the customers in the USA Owner’s Record The model and serial numbers are located on the rear of the receiver. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. masterpage: Left FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX ÉTATS-UNIS.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\020REG.fm 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\020REG.fm4583-748-16(1) This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\020REG.fm masterpage: Right Hereby, Sony Corp., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/ This product is intended to be used in the following countries.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\020REG.fm4583-748-16(1) masterpage: Left Manuals provided for this product The following manuals are provided for this product.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\020REG.fm About These Operating Instructions The instructions in these Operating Instructions describe the controls on the remote control. You can also use the controls on the receiver if they have the same or similar names as those on the remote control. Some illustrations are presented as conceptual drawings, and may be different from the actual products. The items displayed on the TV screen may vary depending on the area.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\020REG.fm4583-748-16(1) masterpage: Left Google Play™ is a trademark of Google Inc. Google Cast™ is a trademark of Google Inc. This product incorporates Spotify software which is subject to 3rd party licenses found here*: https://developer.spotify.com/esdk-thirdparty-licenses/ Spotify and Spotify logos are trademarks of the Spotify Group.* * This function may not be available in some countries/regions.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\010COVTOC.fm masterpage: Right Table of Contents Supplied Accessories Manuals provided for this product ...............6 About These Operating Instructions ............ 7 Supplied Accessories ....................................9 Parts and Controls ....................................... 10 Remote control (1) R03 (size AAA) batteries (2) FM wire antenna (aerial) (1) Preparation Calibration microphone (1) Installing Speakers ..
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left Parts and Controls Receiver Front panel (power) (page 34) Power indicator SPEAKERS (page 36) CONNECTION PAIRING BLUETOOTH (USB) port Connect a USB device here. CALIBRATION MIC jack (page 35) PHONES jack Connect headphones here. Operates the BLUETOOTH function. TUNER PRESET +/– Selects preset stations or channels.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right * When [Bluetooth Standby] is activated, the indicator lights up in amber only if a device has been paired with the receiver. If no devices are paired with the receiver, the indicator turns off. ** For USA, Canadian and Oceanian models only. Indicators on the display panel The indicator lights up to indicate the current status. Input indicator Indicate the current input.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm Wired LAN indicator A LAN cable is connected. BT Lights up when a BLUETOOTH device is connected. Flashes while connecting. masterpage: Left * When playing a Dolby Digital or DTS format disc, make sure that you have completed the digital connections and [Input Mode] is not set to [Analog].
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right HDMI OUT Remote control Switches the output for two monitors connected to the HDMI OUT A (TV) and HDMI OUT B/HDMI ZONE jacks. Output is toggled between “HDMI A”, “HDMI B”, “HDMI A+B” and “HDMI OFF” each time the button is pressed. Select “HDMI OFF” to turn off the output for HDMI OUT A (TV) and HDMI OUT B/HDMI ZONE jacks.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left HOME Displays the home menu on the TV screen. / (previous/next), (play/pause)**, (stop) Skip, play, pause, stop operation. PRESET +/– Selects preset stations or channels. (volume) +**/– Adjusts the volume level of all speakers at the same time. (muting) Turns off the sound temporarily. Press the button again to restore the sound. * For USA, Canadian and Oceanian models only.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right Installing Speakers You can connect up to 7 speakers and 2 subwoofers to this AV receiver. Place the speakers and subwoofers according to the speaker system of your preference. Location of each speaker Note When you connect only one surround back speaker (SB), place the surround back speaker directly behind the listening position.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left Speaker configuration and speaker pattern settings Select the speaker pattern according to the speaker configuration which you are using. Speaker configuration in each zone Main zone Zone 2* Zone 3 [Surround Back Speaker Assign]** [Surround Speaker Assign] Speaker pattern to be selected in [Speaker Settings] For connection, see page 5.1-channel Not used Not used [Off] [Off] [5.1] 17 7.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right Examples of speaker connections Preparation 5.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left 7.1-channel speaker system using surround back speakers 30˚ Same angle. 100˚ – 120˚ Surround speakers Subwoofer Surround back speakers* Center speaker Front speakers Monaural audio cable (not supplied) Speaker cable (not supplied) * If you connect only one surround back speaker, connect it to the L (+/–) terminals.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right 7.1-channel speaker system using front high speakers Preparation 30˚ 100˚ – 120˚ Surround speakers Subwoofer Front high speakers* Center speaker Front speakers Monaural audio cable (not supplied) Speaker cable (not supplied) * After you have made the connection, set [Surround Back Speaker Assign] in [Speaker Settings] to [Off].
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left 5.1-channel speaker system with Zone 2 speakers Main zone 30˚ Zone 2 100˚ – 120˚ Surround speakers Subwoofer Speakers (Zone 2)* Center speaker Front speakers Monaural audio cable (not supplied) Speaker cable (not supplied) * You can only enable the SPEAKERS ZONE 2 terminals if you set [SURROUND BACK/ZONE2 Priority] in [Speaker Settings] to [ZONE2 Terminals], and turn on the ZONE 2 power.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right 3.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left 5.1-channel speaker system with Bi-Amplifier connection You can enhance the sound quality by connecting different amplifiers to both a tweeter and a woofer, using bi-amplifier connection.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right 5.1-channel speaker system with Front B speakers FL(A) FR(A) FL(B) 30˚ FR(B) 100˚ – 120˚ Surround speakers FR(B) Subwoofer Preparation If you have an additional front speaker system, connect it to SPEAKERS SURROUND BACK/ BI-AMP/FRONT HIGH/FRONT B terminals.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left Connecting a TV Connect a TV to the HDMI OUT or MONITOR OUT jack. You can operate this receiver using the menu on the TV screen when you connect the TV to the HDMI OUT jack. For a 4K TV connection, visit the Help Guide. Notes on connection Before connecting cables, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right It is not necessary to connect all the cables. HDMI connection for audio/video signals is required.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left Connecting a TV compatible with the Audio Return Channel (ARC) function via an HDMI connection With just one HDMI cable connection, you can listen to the TV audio from the speakers connected to the receiver while the receiver sends audio and video signals to the TV. Audio/Video signals HDMI cable (not supplied) Note For this connection, you need to turn the Control for HDMI function on.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right Connecting a TV without HDMI jacks Preparation It is not necessary to connect all the cables. Connections for video signals are required.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left Connecting Audio-Visual Devices Connecting devices with HDMI jacks Before connecting cables, be sure to disconnect the AC power cord (mains lead). The HDMI jacks are compatible with HDCP 2.2. To watch content protected by HDCP 2.2, such as 4K content, connect these HDMI jacks to HDCP 2.2-compatible HDMI jacks on the TV and player. Refer to the operating instructions of the connected device for details.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right Front Preparation Audio/Video signals Game console, DVD player, etc. HDMI cable (not supplied) Tip This HDMI connection is an example. You can connect each HDMI device to any HDMI input. The BD/DVD and SA-CD/CD inputs have better sound quality. When you need a higher sound quality, connect your device to these jacks and select them as the input. The image quality depends on the connecting jack.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left Connecting devices with jacks other than HDMI jacks Before connecting cables, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right Tip Preparation You can rename each input so that the name can be displayed on the display panel of the receiver. For details, refer to “Changing the name for each input (Name)” in Help Guide. Connecting another amplifier in Zone 2 Before connecting cables, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left Connecting another amplifier or TV in the HDMI zone Before connecting cables, be sure to disconnect the AC power cord (mains lead). Main zone HDMI zone Speaker TV Speaker Amplifier/ Receiver Audio/Video signals HDMI cable (not supplied) Recommended connection Alternative connection Note To use this connection, set [HDMI Out B Mode] in the [HDMI Settings] menu to [Zone].
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Right Preparation Connecting the Antenna (aerial) Before connecting the antenna (aerial), be sure to disconnect the AC power cord (mains lead). LAN cable (not supplied) ADSL modem/ Cable modem Internet Broadband router LAN cable (not supplied) FM wire antenna (aerial) (supplied) Note Be sure to fully extend the FM wire antenna (aerial).
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm masterpage: Left Note Note Audio playback on a server may occasionally be After you turn off the receiver, “STANDBY” flashes on the display panel. Do not disconnect the AC power cord (mains lead) while “STANDBY” is flashing. This may cause a malfunction. interrupted if you use a wireless connection.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\030CON.fm What you can do with Easy Setup Auto Calibration Connect the supplied calibration microphone to CALIBRATION MIC jack. Set up the calibration microphone at your listening position. Calibration microphone Before you perform Auto Calibration Disconnect the headphones. Remove any obstacles between the calibration microphone and the speakers.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm Selecting the front speakers Be sure to use the buttons on the receiver to perform this operation. SPEAKERS masterpage: Left Listening/Watching Enjoying Sound and Video Playing AV devices 1 Turn the TV on, and then switch the input of the TV to the input to which the receiver is connected. 2 Press HOME. Press SPEAKERS repeatedly. The indicators on the display panel shows which set of terminals are selected.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm Note Before you turn off the receiver, be sure to turn down the volume level to avoid damaging your speakers. masterpage: Right Enjoying sound from speakers located in other rooms (Zone 2/ Zone 3) Tip You can turn INPUT SELECTOR on the receiver or Setting HDMI signal format 1 Connect the speakers located in Zone 2/Zone 3 (page 20, 21). 2 3 Turn on the receiver.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm Tip If you want to listen to the same sound as main zone in other zone, select [SOURCE]. 7 Start playback on the selected input device. 8 Select [Zone2 Volume] or [Zone3 Volume], then adjust the volume. 4 Press HOME, then select [Zone Controls] – [Zone2] – [Zone2 Power] – [On]. You can also press ZONE SELECT on the receiver repeatedly to select “ZONE 2”, then press ZONE POWER on the receiver.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm Enjoying video and sound in another room using a TV or another amplifier (HDMI zone) Connect another amplifier or TV in other room (page 32). 2 Turn on the receiver in main zone, the amplifier and TV in HDMI zone. 3 Set the assignment for the HDMI OUT B/HDMI ZONE jack to [Zone]. Press HOME, then select [Setup] – [HDMI Settings] – [HDMI Out B Mode] – [Zone].
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm For HDMI zone You can only watch video or listen to audio input from the HDMI IN jacks (except for VIDEO 1). masterpage: Left Tip You can also select a sound field by using [Sound Field] in [Audio Settings] from the [Setup] menu. 2CH/MULTI, MOVIE, MUSIC, or FRONT SURROUND on the remote control. 2CH/MULTI, MOVIE, or MUSIC on the receiver.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm masterpage: Right Relations between sound fields and speaker outputs The list below shows which speaker outputs sound when a certain sound field is selected. Note When no sound is heard, check that all the speakers are securely connected to the correct speaker terminals Listening/Watching (page 16), and the correct speaker pattern (page 16) is selected.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm masterpage: Left Multi-channel contents Sound field 2CH/ MULTI MOVIE Display panel Front speakers Center speaker Surround speakers Surround back speakers Subwoofer Front high speakers 2ch Stereo 2CH STEREO Multi Channel Stereo MULTI ST. Direct DIRECT HD-Digital Cinema Sound (Dynamic/ Theater/Studio) HD-D.C.S.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm masterpage: Right Using Network Features What you can do with network features iPhone/iPad/iPod/ Smartphone/Tablet AirPlay Home Network SongPal Video & TV SideView Google Cast™ Wireless speakers Computer/ Network HDD AirPlay Home Network This receiver Music Services Wireless Surround AirPlay This receiver supports AirPlay. You can enjoy audio content from an iPhone/iPad/iPod or your iTunes Library.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm masterpage: Left Video & TV SideView You can control your receiver wirelessly by installing the Video & TV SideView app on your smartphone or tablet device. We highly recommend this app for customers who use a TV manufactured by Sony with the receiver. For details, refer to “Registering Video & TV SideView device to the receiver” in Help Guide.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\040PLA.fm 6 Adjust the volume of the BLUETOOTH headphones. 3 Volume control on the receiver and remote control only works for the BLUETOOTH headphones. Launch SongPal, and download a Google Castenabled music app. Note 4 Launch the Google Castenabled app, then tap the Cast button to select “STR-DN1070”. 5 Select music to listen to on your Google Cast-enabled app.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm masterpage: Left Note The wireless surround function will be available with the receiver version M35.R.2000 or later and the wireless speaker version 2.00 or later. If you cannot set the wireless surround function, version of the receiver or wireless speaker may not be the latest version. For checking the receiver version information, press HOME, then select [Setup] – [System Settings] – [System Information].
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm 5 Update the software. 6 Troubleshooting If a problem occurs while operating the receiver, check the following to resolve the problem before consulting your nearest Sony dealer. Check to see if the problem is listed in this “Troubleshooting” section. Visit the Help Guide for detailed examples. You can search by a keyword using the online troubleshooting guide. For the customers in Europe: http://rd1.sony.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm Some playback devices need to be set up. Refer to the operating instructions supplied with each device. Be sure to use a High Speed HDMI Cable with Ethernet when you view images or listen to sound, especially for 1080p, Deep Color (Deep Colour), 4K or 3D transmission. Premium High Speed HDMI Cable with Ethernet is required for 4K/60p 4:4:4, 4:2:2 and 4K/60p 4:2:0 10 bit etc.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm Network connection Cannot connect to the network using WPS via a wireless LAN connection. You cannot connect to a network using WPS if your access point is set to WEP. Set up your network after searching the access point using the access point scan. Cannot connect to the network. Check that the LAN cable is connected to the receiver when you want to connect the receiver to the network via a wired LAN connection.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm No sound is heard from the wireless speakers during AirPlay playback. During AirPlay playback, the wireless surround does not function. When AirPlay playback is started, the wireless surround function stops automatically. Perform the wireless surround setting again after you have finished the AirPlay playback.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm Warning 41, Warning 42 The input from the microphone is too large. The distance between the speaker and the microphone may be too short. Set them further apart and perform the measurement again. On placement Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm When a person, metal object, wall or other obstruction is between the devices with a BLUETOOTH connection Locations where a wireless LAN is installed Around microwave ovens that are in use Locations where other electromagnetic waves are generated Effects of other devices BLUETOOTH devices and wireless LAN (IEEE 802.11b/g/n) device use the same frequency band (2.4 GHz).
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm 3) INPUT SHORT (with sound field and equalizer bypassed). network, input level. 4) Weighted FM tuner section Tuning range USA and Canadian models: 87.5 MHz – 108.0 MHz (100 kHz step) Other models: 87.5 MHz – 108.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm masterpage: Left Transmission range (A2DP) 20 Hz – 40,000 Hz (LDAC sampling frequency 96 kHz with 990 kbps transmission) 20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating system, software application, etc.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm masterpage: Right END USER LICENSE AGREEMENT IMPORTANT: BEFORE USING THE SOFTWARE, PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY. BY USING THE SOFTWARE YOU ARE ACCEPTING THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS OF THIS EULA, YOU MAY NOT USE THE SOFTWARE.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm masterpage: Left CONTENT SERVICE PLEASE ALSO NOTE THAT THE SOFTWARE MAY BE DESIGNED TO BE USED WITH CONTENT AVAILABLE THROUGH ONE OR MORE CONTENT SERVICES (“CONTENT SERVICE”). USE OF THE SERVICE AND THAT CONTENT IS SUBJECT TO THE TERMS OF SERVICE OF THAT CONTENT SERVICE. IF YOU DECLINE TO ACCEPT THOSE TERMS, YOUR USE OF THE SOFTWARE WILL BE LIMITED.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm masterpage: Right AUTOMATIC UPDATE FEATURE From time to time, SONY or the THIRD-PARTY SUPPLIERS may automatically update or otherwise modify the SOFTWARE, including, but not limited to, for purposes of enhancement of security functions, error correction and improvement of functions, at such time as you interact with SONY’s or third parties’ servers, or otherwise.
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\010BCO.