Operating Instructions

49
GB
D:\NORM'S JOB\SONY HA\SO160039\STR-DN1070 (PMRF 05)\4583748161_GB\050ADD.fm masterpage: Right
STR-DN1070
4-583-748-16(1)
Additional Information
 No sound is output from the surround
speakers if you set the speaker pattern to a
setting that does not have surround
speakers and playback a DSD multi-channel
source.
 No sound is output from the Zone 2/3
speakers if you turn on DSD Native function
and play back a DSD file in Main Zone.
There is no sound via the HDMI OUT A (TV)
(ARC) jack when using the Audio Return
Channel function.
 Set [Control for HDMI] to [On] in the [HDMI
Settings] menu.
 Make sure that your TV is compatible with
the Audio Return Channel function.
 Make sure that the HDMI cable is connected
to a jack on your TV that is compatible with
the Audio Return Channel function.
The surround effect cannot be obtained.
 Make sure you have selected a sound field
for movies or music.
 “PLll Movie”, “PLll Music”, “PLllx Movie”,
“PLllx Music”, “Neo6.CINEMA”, and
“Neo6.MUSIC” do not work when the
speaker pattern is set to “2.0” or “2.1”.
Cannot connect to the network using WPS
via a wireless LAN connection.
 You cannot connect to a network using WPS
if your access point is set to WEP. Set up
your network after searching the access
point using the access point scan.
Cannot connect to the network.
 Check that the LAN cable is connected to
the receiver when you want to connect the
receiver to the network via a wired LAN
connection.
 Check the network information. If the
connection failed, set up the network
connection again.
 If the receiver is connected through a
wireless network, move the receiver and
the wireless LAN router/access point closer
to each other and perform the setup again.
 Make sure that you use a wireless LAN
router/access point.
 Make sure that the wireless LAN router/
access point is turned on.
 Check the settings of the wireless LAN
router/access point and perform the
setup again. For details on the settings of
devices, refer to the operating
instructions of the devices.
 Wireless networks are influenced by
electromagnetic radiation emitted by
microwave ovens and other devices.
Move the receiver away from these
devices.
Cannot select the [Network Settings] menu.
 Wait for a few moments after you have
turned on the receiver, and then select the
[Network Settings] menu again.
No sound or only very low-level sound is
heard from the wireless speaker.
 Depending on the input signal, a surround
effect with presence may not be obtained.
Depending on the program or disc, audio
signals for the surround channels are
output at a very low level.
 When you play content compatible with
copyright protection technology (HDCP
etc.), it may not be output from the receiver.
 Check the surround speakers connection on
[Wireless Surround Settings] – [Surround
Speaker Connection Check].
 Adjust the volume level of the surround
speakers on [Setup] – [Speaker Settings] –
[Level].
The sound is delayed behind the picture.
 When using the wireless surround function,
the sound may be delayed.
The receiver cannot connect to the network.
 The wireless LAN function is not available
when using the wireless surround function.
Connect to the network via wired LAN.
The wireless speakers cannot be connected
to the receiver.
 Update the software version of the receiver
and wireless speakers to the latest version.
Network connection
Wireless Surround