Installation Guide
Table Of Contents
- Cover
- GB
- Map of GUI Menu System
- Connections & settings (multi room/single room)
- Preparing the receiver
- Connecting equipment
- Setting up the receiver
- Outputting a test tone from each speaker (Test Tone)
- Displaying a test screen (Test Picture)
- Adjusting the sound balance automatically (Auto Calibration)
- List of messages after Auto Calibration measurements
- Saving/loading settings of the receiver
- Updating the firmware with a USB flash drive
- Setting up through a web browser
- Using the PING button
- Using the hidden commands
- Accessories
- Others
- FR
- Carte du système de l’IGU
- Branchements et réglages (plusieurs pièces/pièce unique)
- Préparation de l’ampli-tuner
- Raccordement d’un équipement
- Raccordement d’un téléviseur 4K prenant en charge HDCP 2.2 sur un décodeur de flux 4K à l’aide d’un câble HDMI compatible 4K
- Raccordement sur une chaîne Hi-Fi
- Établissement d’une connexion pour PoE (Power over Ethernet) (uniquement pour STR-ZA3000ES)
- Établissement d’une connexion sur plusieurs zones
- Mixage d’entrées audio/vidéo distinctes (dernier mode vidéo)
- Réglage de l’ampli-tuner
- Reproduction d’une tonalité de test depuis chacune des enceintes (Test Tone)
- Affichage d’une mire (Test Picture)
- Réglage automatique de la balance du son (Auto Calibration)
- Liste des messages après les mesures d’Auto Calibration
- Enregistrement/chargement des réglages sur l’ampli-tuner
- Mise à jour du micrologiciel à l’aide d’une clé USB
- Configuration via un navigateur Web
- Utilisation du bouton PING
- Utilisation des commandes cachées
- Accessoires
- Autres
- ES
- Mapa del sistema de menú de la interfaz gráfica de usuario
- Conexiones y configuraciones (varias habitaciones/una sola habitación)
- Cómo preparar el receptor
- Cómo conectar el equipo
- Cómo conectar una TV 4K compatible con HDCP 2.2 a un transmisor de 4K utilizando un cable HDMI compatible con 4K
- Cómo enlazar un sistema de música de alta fidelidad
- Cómo realizar una conexión PoE (alimentación a través de Ethernet) (solo para STR-ZA3000ES)
- Cómo realizar una conexión de varias zonas
- Cómo combinar entradas de audio y video diferentes (último modo de video)
- Cómo configurar el receptor
- Cómo reproducir un tono de prueba por cada altavoz (Test Tone)
- Cómo mostrar una pantalla de prueba (Test Picture)
- Cómo ajustar el balance de sonido automáticamente (Auto Calibration)
- Lista de mensajes después de las medidas de Auto Calibration
- Cómo guardar o cargar la configuración del receptor
- Cómo actualizar el firmware con una unidad flash USB
- Cómo realizar la configuración a través de un navegador web
- Cómo utilizar el botón PING
- Cómo utilizar comandos ocultos
- Accesorios
- Otros
- GB
![](/manual/sony/str-za1000es/installation-guide-english-spanish-french/images/img-21.png)
21
GB
Others
Others
Zone distribution
The receiver can deliver input signals for each video or audio input to another zone in
combinations such as the following.
Zone distribution capability (video)
Video Input Main Zone
HDMI A OUT
HDMI OUT B Main Zone
MONITOR OUT
(Composite)
Main Zone
MONITOR OUT
(Component)
Zone 2
MONITOR OUT
(Composite)
Main Zone
HDMI B OUT
Zone 2
HDMI OUT
VIDEO input jacks (composite)
* –
VIDEO input jacks (component)
* – –
HDMI IN jacks
–* –* –*
* The receiver cannot output a different analog signal to the zone 2 HDMI OUT jack while an analog
signal of the main zone is being output from the HDMI OUT A jack.
* HDMI down converting is prohibited by HDMI guidelines.
Zone distribution capability (audio)
Input Source/
Output
Main Zone
HDMI A OUT
HDMI OUT B Main Zone
SPEAKER OUT
Zone 2
SPEAKER OUT
Zone 2
PRE OUT
(Fixed/
Variable)
Zone 3
PRE OUT
(Fixed/
Variable)
Multi Ch
PRE-OUT
(ZA3000ES
Only)
Main Zone
HDMI B OUT
Zone 2
HDMI OUT
Audio input
jacks (RCA)
– – *
Built-in Tuner
– –
DIGITAL
OPTICAL IN
jacks
– – * * * –
DIGITAL
COAXIAL IN jack
– – * * * –
HDMI IN jacks
* * –
* Digital audio stream is not supported for distributing signals such as Dolby Digital and DTS. The Digital
Audio output setting should be “2ch PCM” on the player device.
* Zone 2 speaker out and pre-out only support 2-channel audio output. Multi-channel stream signals are
automatically converted to 2 channels signals. The DSD signal is not output to zone 2.
* Only analog input can be selected in zone 3.