Help Guide (Web manual)

When you play content on a device (Blu-ray Disc player, PlayStation®4, etc.) connected to the receiver, the
receiver and the TV are turned on automatically, the input of the receiver is switched to the input of the device
being played, and sound is output from the speakers connected to the receiver.
Note
If [Standby Through] is set to [Auto] or [On], and the TV sound was output from the speakers of the TV last time you
watched the TV, the receiver does not turn on and the sound and picture are output from the TV even if you play content
on the device.
Depending on the TV, the beginning part of content being played may not play correctly.
One-Touch Play function may work with other devices than those manufactured by Sony, but operation is not
guaranteed.
[86] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync)
Selecting the optimum picture quality and sound field
automatically (Scene Select function)
The sound field are selected automatically according to the Scene Select setting on your TV.
For details on this operation, refer to the operating instructions of the TV.
The Scene Select/Sound Mode setting and the sound field setting of the receiver will change as follows.
Cinema: Dolby Surround
Sports: Dolby Surround
Music: Dolby Surround
Animation: Dolby Surround
Photo: Multi Stereo
Game: Dolby Surround
Graphics: Multi Stereo
News: Multi Stereo
Note
The Scene Select function is a function developed by Sony, and cannot be used on other devices than those
manufactured by Sony.
[87] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync)
Operating the receiver menu using the TV remote control
(Remote Easy Control function)
You can select the receiver by the SYNC MENU of the TV and operate the receiver. This function can be used if
the TV supports the SYNC MENU. For details, refer to the operating instructions of the TV.