Help Guide (Web manual)

Hint
You can check the remaining time before the receiver turns off on the System Setup screen. Also, the remaining time
appears on the bottom right of the TV screen when it becomes 1 minute or less.
The sleep timer will be canceled if you perform the following:
Update the software of the receiver.
Turn the receiver on or off.
[98] Using Other Features
Viewing information on the display panel
The display panel provides various information on the status of the receiver, such as the sound field.
Note
Characters or marks in some languages may not be displayed.
1:30:00
1:00:00
0:30:00
Off
[SLEEP] lights up on the display panel of the receiver when sleep timer is being used.
Select the input for which you want to check information.
1
Press DISPLAY repeatedly.
The default input name or the input name you have set is displayed on the upper line of the display panel.
The lower line of the display panel will change sequentially as follows each time you press DISPLAY:
currently applied sound field (*1)→stream information (*2)→default input name (*3).
When listening to FM or AM radio
The band, preset number, and preset station name (*4) or frequency are displayed on the upper line of the
display panel.
The currently applied sound field is displayed on the lower line of the display panel.
2
[PURE DIRECT] appears on the display panel when the Pure Direct function is activated.
*1
Stream Information is not displayed when no signals can be found for the selected input.
*2
Appears only when you have set an arbitrary input name.
*3
Appears only when you have set an arbitrary preset station name. In this case, the preset station name and frequency are displayed
alternately each time you press DISPLAY.
*4