Help Guide (Web manual)

[99] Adjusting Settings Easy Setup

Setting up the receiver using the Easy Setup

When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup screen appears

on the TV screen. You can set up the following settings for the receiver by following the instructions on the Easy

Setup screen.

Auto Calibration

Check your speaker system and perform automatic calibration according to the configuration and

arrangement of your speaker system.

Internet Setup

Configure settings to connect the receiver to the network.

Note

Switch the input of the TV to the input to which the receiver is connected to use this function.

If the Easy Setup screen does not appear or you want to display the Easy Setup screen manually, you can

display it by selecting [Setup] - [Easy Setup] from the home menu.

[100] Adjusting Settings

Input Setup

Changing the assignment and display for the input jacks

You can customize the settings for each input according to your preferences and usage.

Select [Setup] - [Input Setup] from the home menu, then set each item shown below.

Input

You can change the settings of [Icon], [Name], [Watch/Listen], [Show/Hide], [HDMI], [OPTICAL / COAXIAL],

[COMPONENT], [VIDEO IN], [AUDIO IN], [Input Mode], [Preset Sound Field], [In-Ceiling Speaker Mode], [A/V

Sync], [Subwoofer Low Pass Filter], [Subwoofer Level], [Preset Gain Level], [Trigger 1] (*1), [Trigger 2] (*1),

[Trigger 3] (*1) and [Trigger] (*2) for the desired input.

Note

The settings of [AUDIO IN] on the Input Setup screen are fixed.

Icon

You can set the icon displayed on the Watch/Listen menu.

Name

You can change the name displayed on the Watch/Listen menu.

for STR-ZA3100ES

for STR-ZA2100ES/STR-ZA1100ES