Help Guide (Web manual)

You can turn on or off the low-pass filter for the subwoofer output. The low-pass filter works when PCM signals

are input via an HDMI connection. You can set the function for each input to which an HDMI input jack is

assigned independently. Turn the function on if you connect a subwoofer without the crossover frequency

function.

Subwoofer Level

You can set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection.

You can set the level for each input to which an HDMI input jack is assigned independently.

Preset Gain Level

You can preset the gain level for each input.

Trigger 1 to 3 (for STR-ZA3100ES)

Trigger (for STR-ZA2100ES/STR-ZA1100ES)

You can select input options for use of the 12V Trigger function.

[101] Adjusting Settings

Input Setup

Changing the name for each input (Name)

You can enter up to 8 characters for each input name.

[102] Adjusting Settings

Speaker Setup

1. About Auto Calibration

Select [Setup] - [Input Setup] from the home menu.

Select the input name you want to change.

Select [Name].

An on-screen keyboard appears on the TV screen.

Press

/ / / and to select characters one by one to enter the name.

Select [Enter].

The name you entered is registered.