Help Guide (Web manual)

This function does not work in the following cases:

[Direct] is being used and an analog input is selected.

[Pure Direct] is set to [On].

Frequencies for [Bass] and [Treble] are fixed.

Depending on the audio format, the receiver may play signals at a lower sampling frequency than the original sampling

frequency of the input signals.

Hint

You can also select [Equalizer] in [Sound Effects] from the home menu.

[119] Adjusting Settings Speaker Setup

Lifting up the sound of the center speaker (Center Speaker

Lift Up)

By using the front high speakers, you can lift up the sounds of the center speaker to an appropriate height on

the screen, allowing you to enjoy natural sound without discomfort.

Hint

This function does not work in the following cases:

There is no center speaker.

Front high speakers are not assigned to the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 2)

terminals.

The [2ch Stereo] or [Multi Stereo] sound field is being used.

[In-Ceiling Speaker Mode] is set to [Front & Center] or [Front].

[120] Adjusting Settings Speaker Setup

Setting the correct angles of the surround speakers

Select [Setup] - [Speaker Setup] from the home menu.

Select [Center Speaker Lift Up].

Select the setting you want.

1 - 10

Off