Help Guide (Web manual)

Note

This function does not work in the following cases.

[Direct] is being used and an analog input is selected.

There are no surround back speakers and [Surround Speaker Position] is set to [Front].

When [In-Ceiling Speaker Mode] is set to [Front & Center] or [Front].

Perform Auto Calibration before you use this function.

[122] Adjusting Settings Speaker Setup

Setting the height from the floor to the ceiling speakers

(Ceiling Height)

You can set the height from the floor to the ceiling speakers. The In-Ceiling Speaker Mode function works better

by configuring this setting and performing Auto Calibration.

Type B: Places four surround speakers at virtually identical angles, according to Recommendation ITU-

R for 7.1 channel speaker placement.

Off: Speaker positioning is not relocated.

Select [Setup] - [Speaker Setup] from the home menu.