Help Guide (Web manual)

If using a fixed IP address

Select [Manual] in step 3. The IP address input display appears on the TV screen.

Enter the value for [IP Address] using the on-screen keyboard. Press

/ / / and to select the

characters one by one, then select [Enter] to confirm the values.

Enter the values for [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS], then select [Next].

Hint

See [Information] when checking the network settings.

[125] Adjusting Settings Network Setup

Checking the network information (Information)

You can check the various settings on the network.

[126] Adjusting Settings

Network Setup

Enabling the network function even when this receiver is in

standby mode (Network Standby)

The receiver starts connecting to the network. For details, refer to the messages that appear on the TV

screen.

Select [Setup] - [Network Setup] from the home menu.

Select [Information].

You can check the settings (*) for [Connection Status], [Internet Access], [IP Address Setting], [IP

Address], [Subnet Mask], [Default Gateway], [DNS Settings], [Primary DNS], [Secondary DNS] and [MAC

Address].

The setting items during setup differ depending on the network environment and connection type.

Select [Setup] - [Network Setup] from the home menu.

Select [Network Standby].

Set to [On] or [Off].