Help Guide (Web manual)

Note

When the receiver is in standby mode, the (power) indicator on the front panel lights up in amber if [Network

Standby] is set to [On].

The top of the cabinet may become hot. This is because part of the circuit(s) inside the receiver is(are) still turned on,

and is not a malfunction.

[127] Adjusting Settings Network Setup

Enjoying Hi-Fi System sound (Music Connect)

You can configure settings to enable the receiver to link with a Hi-Fi System device.

Note

For details on how to configure settings for this function, consult your nearest Sony dealer.

On: The network function works even when the receiver is in standby mode, and the receiver resumes

operation when controlled over the network.

Off: The network function turns off when the receiver is in standby mode. The receiver takes more time

to resumes operation when powered on again.

Select [Setup] - [Network Setup] from the home menu.

Select [Music Connect].

Select the setting you want.

Device 1

Connected Device: Select the connected device to enable the function. Select [Remove Connected

Device] to disable the function.

Input for Music Connect 1: Select the input to link with.

Preset Volume: Preset the volume level.

Output Zone: Select the zone to which you want to output sound.

Device 2

Connected Device: Select the connected device to enable the function. Select [Remove Connected

Device] to disable the function.

Input for Music Connect 2: Select the input to link with.

Preset Volume: Preset the volume level.

Output Zone: Select the zone to which you want to output sound.