Help Guide (Web manual)

Note

This function does not work in the following cases:

[Direct] is being used and an analog input is selected.

[Pure Direct] is set to [On].

The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals,

depending on the audio format.

Hint

You can also select [Sound Optimizer] in the [Audio Setup] menu.

[130] Adjusting Settings Audio Setup

Selecting a sound field (Sound Field)

You can select from a variety of sound field modes according to speaker connections or input sources.

Note

The sound fields for movie may not work, depending on the input or the speaker pattern you select, or with audio

formats.

The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals,

depending on the audio format.

Some speakers or the subwoofer may not output sound, depending on the sound field setting.

If there is any noise present, the noise may be different, depending on the sound field you select.

Hint

Low: Adjusts for a CD or other software whose average sound pressure level is processed highly.

Off

Select [Setup] - [Audio Setup] from the home menu.

Select [Sound Field].

Select the sound field you want.

For details on each sound field, see “

Selectable sound fields and their effects.”