Help Guide (Web manual)

Note

This function does not work when [Direct] is being used and an analog input is selected.

[134] Adjusting Settings Audio Setup

Synchronizing audio with video output (A/V Sync)

You can delay the output of audio to minimize the time gap between audio output and a visual display.

This function is useful when using a large LCD or plasma monitor or a projector. You can set the function for

each input independently.

Note

The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals,

depending on the audio format.

[135] Adjusting Settings Audio Setup

Selecting the language of digital broadcasts (Dual Mono)

Select [Subwoofer Low Pass Filter].

Select the setting you want.

On: Always activates the low-pass filter with a cutoff frequency of 120 Hz.

Off: Does not activate the low-pass filter.

Select [Setup] - [Audio Setup] from the home menu.

Select [A/V Sync].

Select the setting you want.

HDMI Auto: The time gap between the audio output and visual display of a monitor connected via an

HDMI connection will be adjusted automatically. This function is available only when the monitor

supports the A/V Sync function.

0 ms – 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals.