Help Guide (Web manual)

is selected.

This function does not work for the HDMI OUT B (ZONE 2) jack.

[143] Adjusting Settings HDMI Setup

Setting the HDMI audio signal output of connected devices

(Audio Out)

You can set the HDMI audio signal output of playback devices connected to the receiver via an HDMI connection.

Note

Audio signals are not output from the speaker of the TV when [Audio Out] is set to [AMP].

When [TV + AMP] is selected, the sound quality of the playback device depends on the sound quality of the TV, such as

the number of channels and the sampling frequency, etc. If the TV has stereo speakers, the sound output from the

receiver is in the same stereo as the TV, even when playing back multi-channel source.

When you connect the receiver to a video device (projector, etc.), sound may not be output from the receiver. In this

case, select [AMP].

[144] Adjusting Settings HDMI Setup

Setting the Zone 2 HDMI audio output of connected devices

(Zone2 Audio Out)

You can set the Zone 2 HDMI audio signal output for playback devices connected to the receiver via an HDMI

connection.

Select [Setup] - [HDMI Setup] from the home menu.

Select [Audio Out].

Select the setting you want.

AMP: HDMI audio signals from playback devices are only output to the speakers connected to the

receiver. Multi-channel sound can be played back as it is.

TV + AMP: The sound is output from the speaker of the TV and the speakers connected to the

receiver.

Select [Setup] - [HDMI Setup] from the home menu.