Help Guide (Web manual)

Note

You can only configure this setting when [HDMI Out B Mode] is set to [Zone2].

When a video device (projector, etc.) is connected to the HDMI OUT B (ZONE 2) jack, sound may not be output from the

receiver. In this case, set [Zone2 Audio Out] to [AMP].

When a TV which does not support audio content protection is connected to the HDMI OUT B (ZONE 2) jack, specific

audio may not be output from the receiver. In this case, set [Zone2 Audio Out] to [AMP].

When [Zone2 Audio Out] is set to [Zone2 TV + AMP] or [AMP], audio signals will be downmixed. The following

restrictions apply to downmixing.

If you change the sound field or speaker settings in the main zone while the input for Zone 2 is set to SOURCE or the

same input is selected in the main zone and Zone 2, the sound may also be momentarily interrupted in Zone 2.

The D.L.L. function does not work in the main zone.

The volume level of sound from the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 2) terminals and

the HDMI OUT B (ZONE 2) jack may be different from sound that is not downmixed.

No sound will be output to Zone 2 if you play a DTS-CD with different HDMI inputs selected in the main zone and Zone

You cannot remedy the time gap between video output on the TV connected to the HDMI OUT B (ZONE 2) jack and

audio output from the speaker connected to the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 2)

terminals using the A/V Sync function.

[145] Adjusting Settings HDMI Setup

Setting the level of the subwoofer (Subwoofer Level)

You can set the level of the subwoofer to 0 dB or +10 dB when multi-channel PCM signals are input via an

HDMI connection. The level for each input to which an HDMI input jack is assigned can be set independently.

Select [Zone2 Audio Out].

Select the setting you want.

AMP: Recommended setting when a TV is connected directly to the HDMI OUT B (ZONE 2) jack.

Sound is output from the speakers connected to the receiver.

Sound is not output from the TV speakers.

Zone2 TV + AMP: Recommended setting when a TV is connected directly to the HDMI OUT B (ZONE

2) jack.

Sound is output from the TV speakers and the speakers connected to the receiver.

Zone2 AMP: Recommended setting when another amplifier is connected to the HDMI OUT B (ZONE 2)

jack.

Sound is output from the another amplifier connected to the HDMI OUT B (ZONE 2) jack.

Sound is not output from the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 2)

terminals and the ZONE 2 AUDIO OUT jacks.

Select [Setup] - [HDMI Setup] from the home menu.