Help Guide (Web manual)

[158] Adjusting Settings System Setup

Setting standby mode (Auto Standby)

You can set the receiver to switch to standby mode automatically when you do not operate the receiver or when

no signals are input to the receiver.

Note

This function does not work in the following cases:

[FM TUNER] or [AM TUNER] is selected as the input.

The software of the receiver is being updated.

If you use the Auto Standby mode and the sleep timer at the same time, the sleep timer has priority.

[159] Adjusting Settings System Setup

Changing the volume display (Volume Display)

You can set the volume display on the TV screen and display panel.

Select [Auto Display].

Select the setting you want.

Off

Select [Setup] - [System Setup] from the home menu.

Select [Auto Standby].

Select the setting you want.

On: The receiver switches to standby mode after approximately 20 minutes.

Off