Help Guide (Web manual)

Hint

You can check the remaining time before the receiver turns off on the System Setup screen. Also, the remaining time

appears on the bottom right of the TV screen when it becomes 1 minute or less.

The sleep timer will be canceled if you perform the following:

Update the software of the receiver.

Turn the receiver on or off.

[162] Adjusting Settings System Setup

Checking the software version (Software Version)

You can check the current software version of the receiver.

[163] Adjusting Settings

System Setup

Updating the software via the network (Network Update)

You can update the receiver software via the network.

Connect the receiver to the Internet beforehand, and then make sure [Internet Connection] is displayed as [OK]

in the [Network Information] menu.

Set specified time.

2:00:00

1:30:00

1:00:00

0:30:00

Off

[SLEEP] lights up on the display panel of the receiver when sleep timer is being used.

Select [Setup] - [System Setup] from the home menu.

Check [Software Version].

Select [Setup] - [System Setup] from the home menu.

Select [Network Update].