Help Guide (Web manual)

power in the main zone.

[169] Adjusting Settings Install Setup

Displaying a test screen (Test Picture for HDMI Out A/B)

You can display a test screen with specific resolution and frame rate for HDMI OUT A and HDMI OUT B (ZONE

2) jacks.

Hint

You can also display a test screen with 480p/60 Hz for HDMI OUT A and HDMI OUT B jacks by pressing TEST PICTURE

on the remote control.

HDMI audio signals are not output while the test screen is displayed.

[170] Adjusting Settings Install Setup

Locking settings of the receiver (Settings Lock)

You can lock the receiver settings to prevent setting values from being accidentally erased.

Select [Setup] - [Install Setup] from the home menu.

Select [Test Picture for HDMI Out A] or [Test Picture for HDMI Out B].

Select the setting you want.

4K/60Hz/4:4:4 (*)

4K/24Hz/4:4:4

1080p/60Hz

480p/60Hz

Off

When [HDMI Out B Mode] is set to [Zone2], this setting does not appear in [Test Picture for HDMI Out B].

Select [Setup] - [Install Setup] from the home menu.

Select [Settings Lock].