Help Guide (Web manual)

MAIN (power)
Turns the receiver on or sets it to the standby mode.
Saving power in standby mode
Save power by setting the receiver as follows:
Set [Control for HDMI], [Standby Through], [Audio Return Channel], [Network Standby], [Zone2 Power]
and [Zone3 Power] to [Off].
1.
ZONE2, ZONE3, MAIN
Selects the place where you will control.
2.
PURE DIRECT
Press to use the Pure Direct function.
3.
IN-CEILING SP
Activates the In-Ceiling Speaker Mode.
4.
AMP MENU
Displays the menu on the display panel of the receiver to operate the receiver.
5.
, / / /
Press / / / to select the menu items.
Then press
to enter the selection.
6.
OPTIONS
Displays the options menus on the TV screen for item selection.
7.
ZONE2 (power), ZONE3 (power)
Turns the receiver in Zone 2 or Zone 3 on or sets it to the standby mode.
8.
HDMI OUTPUT
Switches the output for two monitors connected to the HDMI OUT A and HDMI OUT B (ZONE 2) jacks.
9.