Help Guide (Web manual)

Setting the FM station receiving mode (FM Mode)

You can set the FM station receiving mode to the stereo mode or monaural mode.

Note

You can set FM mode in the options menu if the frequency indication is selected in step 3.

Hint

You can also set FM mode with [Tuner Setup] in the [System Setup] menu.

You can select this setting only when you have performed Auto Calibration and saved the settings.

You can only select this parameter if [SP PATTERN] is not set to a pattern with surround back speakers.

XXX represents a speaker channel (FRONT, CENTER, SURROUND, HEIGHT1 (*12), HEIGHT2 (*12), HEIGHT (*13)).

XXX represents a speaker channel (FRONT L, FRONT R, CENTER, SURROUND L, SURROUND R, SUR BACK L, SUR BACK R, SUR BACK,

HEIGHT1 L (*12), HEIGHT1 R (*12), HEIGHT2 L (*12), HEIGHT2 R (*12), HEIGHT L (*13), HEIGHT R (*13), SUBWOOFER).

Some parameters or settings may not be available depending on the speaker pattern setting.

You can only select this parameter if the speaker is set to [SMALL].

When [Setup] - [System Setup] - [Volume Display] is set to [Relative].

When [Setup] - [System Setup] - [Volume Display] is set to [Absolute].

x.xxx represents the version number.

for STR-ZA3100ES

*10

for STR-ZA2100ES/STR-ZA1100ES

*11

for STR-ZA3100ES/STR-ZA2100ES

*12

for STR-ZA1100ES

*13

Select [Listen] - [FM TUNER] from the home menu.

If the Simple mode screen appears, switch to the Full mode screen by pressing OPTIONS and selecting

[Full] in [FM/AM Display] from the options menu.

Select a station on the FM band.

Press OPTIONS.

Select [FM Mode] from the options menu.

Select the setting you want.

Stereo: The FM station is received in stereo.

Monaural: The FM station is received in monaural.