Help Guide (Web manual)

Note
The above explanations are intended to serve as examples.
[10] Preparation 1. Installing speakers
Locations and names of speakers
INPUT SETUP
Displays the [Input Setup] menu.
2.
AUTO CAL
Displays the auto calibration menu on the display panel of the receiver to perform Auto Calibration.
3.
MEMORY
Press to enter the memory mode of the tuner.
4.
PRESET +/–
Press to select the preset stations.
5.
FM/AM
Press to select the band you want.
6.
INPUT +/–
Press to select the input source.
7.
INPUT MODE
Press to select the input mode.
8.
SP SETUP
Displays the [Speaker Setup] menu.
9.
TEST (PICTURE, TONE)
Press to output the test picture or test tone.
10
.
SOUND FIELD (2CH/DIRECT, A.F.D., MOVIE, MULTI ST.)
Selects the sound field you want.
11
.
TUNING +/–
Press to select a station.
12
.
+ (*)/-
Adjust the volume level.
13
.
Turns off the sound temporarily. Press the button again to restore the sound.
14
.
The + button has tactile dot. Use the tactile dot as a reference when operating the receiver.
*