Help Guide (Web manual)

Speaker cable (not supplied)
Connecting speakers other than front speakers
Monaural audio cable (not supplied)
Speaker cable (not supplied)
After you have made the bi-amplifier connection, set [SB Speaker Assign] to [Bi-Amp] in the [Speaker Setup]
menu.
Note
After you have installed and connected your speakers, set the speaker pattern to [5.1] using [Speaker Pattern] in the
[Speaker Setup] menu.
You can only set [SB Speaker Assign] if a speaker pattern in which speakers are not connected to the SPEAKERS
SURROUND BACK/HEIGHT(FRONT B/BI-AMP/ZONE 2) terminals is selected.