Help Guide (Web manual)

With just one HDMI cable connection, you can listen to the TV audio from the speakers connected to the
receiver while the receiver sends audio and video to the TV.
HDMI cable (not supplied)
Note
Sony recommends that you use an HDMI cable made by Sony or another HDMI-authorized cable. Be sure to use a High
Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps is required for
4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.
For this connection, you need to turn the Audio Return Channel function on. Press HOME to display the home menu,
select [Setup] - [HDMI Setup], and set [Audio Return Channel] to [Standard].
Hint
If the HDMI jack of the TV (labeled “ARC”) is already connected to another device, disconnect the device and connect
the receiver.
Connecting a TV and a projector
HDMI cable (not supplied)
Note
Sony recommends that you use an HDMI cable made by Sony or another HDMI-authorized cable. Be sure to use a High
Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps is required for
4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.
To use this connection in only one room, select [Setup] - [HDMI Setup], and set [HDMI Out B Mode] to [Main].
Connecting a TV without HDMI jacks