Help Guide (Web manual)

Sony recommends that you use an HDMI cable made by Sony or another HDMI-authorized cable. Be sure to use a High

Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps is required for

4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.

[30] Preparation 3. Connecting a TV

Connecting a 4K TV that supports HDCP 2.2 and a 4K

streaming box using a 4K-compatible HDMI cable

To enjoy audio from 4K content such as 4K movies, connect the HDMI output/input jacks of each device that

supports HDCP 2.2 (*) using HDMI cables, as illustrated below.

4K media player

4K TV or 4K projector

HDMI cable (not supplied)

HDCP 2.2 (High-bandwidth Digital Content Protection 2.2) is newly enhanced copyright protection technology that is used to protect

content such as 4K movies from Studios.

Connect the receiver to a 4K media player using a High Speed HDMI cable.

If you are using an FMP-X10/X5 Media Player:

Connect the cable to the HDMI OUT 1 (for AUDIO VIDEO) jack of the player.

Select [

(Settings)] - [Sound] - [Audio from HDMI OUT] - [HDMI OUT 1] in the Home menu of the FMP-

X10/X5 Media Player after Initial Setup is complete.

If you are using a different 4K media player:

Connect the cable to one of the HDCP 2.2-compatible HDMI output jacks. For details, refer to the operating

instructions supplied with your player.

Connect the receiver to a 4K TV or 4K projector using a High Speed HDMI cable.