Help Guide (Web manual)

Connect the supplied antennas (aerials) to the receiver as illustrated below.
Before connecting antenna (aerial), be sure to disconnect the AC power cord (mains lead).
AM loop antenna (aerial) (supplied)
FM wire antenna (aerial) (supplied)
Note
To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other devices.
Be sure to fully extend the FM wire antenna (aerial).
After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
[36] Preparation 4. Connecting audio-visual devices and the antennas (aerials)
Connecting another amplifier in Zone 2/3
You can enjoy image and sound from a device connected to the receiver in a zone other than the main zone. For
example, you can watch a DVD in the main zone and listen to a CD in Zone 2.
Connecting another amplifier using the VIDEO OUT ZONE 2 and ZONE 2 AUDIO
OUT jacks
TV monitor
Speakers
Other amplifier/receiver
Video cable (not supplied)
Audio cable (not supplied)
Note