Help Guide (Web manual)

The VIDEO OUT ZONE2 jack can output video signal input from the VIDEO IN jacks.
When outputting optical/coaxial audio signals, set the audio output to PCM on the connected device. For details, refer to
the operating instructions of the connected device.
Connecting another amplifier or TV in Zone 2 (with HDMI connection)
HDMI video/audio input signals, optical/coaxial audio input signals are output to Zone 2 using the HDMI OUT B
(ZONE 2) jack on the receiver.
Speakers
TV
Other amplifier/receiver
HDMI cable (not supplied)
Note
The following settings are required for this connection.
Set [HDMI Out B Mode] in the [HDMI Setup] menu to [Zone2]
Set [Zone2 Audio Out] in the [HDMI Setup] menu to [Zone2 AMP]
When outputting optical/coaxial audio signals, set the audio output to PCM on the connected device. For details, refer to
the operating instructions of the connected device.
Connecting another amplifier using the ZONE 3 AUDIO OUT jacks
Speakers
Other amplifier/receiver
Audio cable (not supplied)