Help Guide (Web manual)

You can also connect a device that does not support PoE to the PoE port.
The PoE port lights in red while supplying power.
This receiver supports PoE Class 3.
[43] Preparation 5. Connecting to the network
Connecting the receiver to the network using LAN cables (for
STR-ZA2100ES/STR-ZA1100ES)
The following illustration is an example configuration of a home network with the receiver, and a computer.
The STR-ZA2100ES is used for illustrative purpose in this topic.
Computer
LAN cable (not supplied)
Router
Modem
Internet
[44] Preparation
6. Turning on the receiver/preparing the remote control
Inserting batteries into the remote control
Insert two R03 (size AAA) batteries (supplied) into the remote control. Make sure that the + and - ends are in
the correct position when installing batteries.