Help Guide (Web manual)

Note
Do not leave the remote control in an extremely hot or humid place.
Do not use a new battery with an old one.
Do not mix manganese batteries with other kinds of batteries.
Do not expose the remote control sensor to direct sunlight or lights. Doing so may cause a malfunction.
If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
When the receiver no longer responds to the remote control, replace both of the batteries with new ones.
[45] Preparation 6. Turning on the receiver/preparing the remote control
Turning on the receiver
Before connecting the AC power cord (mains lead), be sure to make connections with speakers and the other
devices.
Connect the supplied AC power cord (mains lead) to the AC IN terminal on the receiver firmly,
then connect the AC power cord (mains lead) to a wall outlet.
AC IN terminal
AC power cord (mains lead) (supplied)
1
Space remains between the plug and the rear panel even when the power cord (mains lead) is inserted firmly. The cord is
supposed to be connected this way. This is not malfunction.
*
Press (power) to turn on the receiver.
2