Help Guide (Web manual)

[50] Preparation Performing Auto Calibration

3. Connecting the calibration microphone

Calibration microphone (supplied)

Note

Insert the plug of the calibration microphone all the way into the CALIBRATION MIC jack. If the calibration microphone is

not connected securely, measurements may not be made properly.

Position the calibration microphone horizontally with the L (left) and R (right) ends at the same height.

[51] Preparation Performing Auto Calibration

4. Selecting the front speakers

You can select the front speakers you want to operate.

Be sure to use the buttons on the receiver to perform this operation.

Connect the supplied calibration microphone to the CALIBRATION MIC jack.

Set up the calibration microphone.

Place the calibration microphone at your listening position and set it at the same height as your ears.

Press SPEAKERS on the receiver repeatedly to select the front speaker system you want to

operate.