Help Guide (Web manual)

Press one of the buttons and release it immediately.

[56] Enjoying Video and Sound Playing AV devices

Enjoying sound of an ARC compatible TV (Audio Return

Channel)

If your TV supports the Audio Return Channel (ARC) function, set the receiver by the following procedure to

output the sound of the TV from the speakers connected to the receiver.

If you connect to a TV that is not compatible with the Audio Return Channel (ARC)

function or you want to select an audio signal using a cable other than an HDMI cable

(e.g. via an optical digital cable or an audio cable)

Select [Setup] - [Input Setup] - [Input Mode] and switch the audio input mode.

Note

Be sure to turn off the volume of the TV or activate the muting function of the TV.

If your TV does not support the System Audio Control function, set [Audio Out] to [TV + AMP] in the [HDMI Setup]

menu to output the sound of the TV from the TV speaker and the speakers connected to the receiver.

[57] Enjoying Video and Sound Playing AV devices

If you use a TV compatible with Dolby Digital Plus output

The receiver can receive Dolby Atmos signals in the Dolby Digital Plus format, not only when audio signals are

input from the HDMI input jack but also from a TV connected to the receiver by using the Audio Return Channel

(ARC) function.

Turn on the ARC function to enable the transmission of Dolby Digital Plus signals. This receiver is designed to

activate the ARC function separately even if [Control for HDMI] is set to [Off] in the [HDMI Setup] menu. In this

Select [Setup] - [HDMI Setup] from the home menu.

Select [Audio Return Channel].

Select the setting you want.

Standard: The sound of the TV connected to the receiver via the HDMI OUT A jack is output from the

receiver when TV input is selected.

Off: The sound of the TV connected to the receiver via the HDMI OUT A jack is not output from the

receiver even when TV input is selected.