Help Guide (Web manual)

case, set the receiver by the following procedure.
Note
The ARC function only works on the TV connected to the HDMI OUT A jack.
If the Control for HDMI function is activated on the source devices connected to the receiver or the TV, the interlocking
functions only work between the TV and the source devices.
[58] Enjoying Video and Sound Playing AV devices
Watching HDCP 2.2 copyright-protected content
To watch HDCP 2.2 copyright-protected content such as 4K content, connect the receiver and TV via an HDCP
2.2-compatible HDMI jack. You can only view copyright-protected 4K content through the HDCP 2.2-compatible
HDMI jack connection. For details on whether the TV and 4K devices are equipped with an HDCP 2.2-compatible
HDMI jack, refer to the operating instructions of the TV and 4K devices.
Turn on the Control for HDMI function of the TV.
1
Change the setting for the audio output of the TV so that the TV can output the Dolby Digital
Plus signals.
For details on setting the TV, refer to the operating instructions of the TV.
2
Set [Audio Return Channel] to [Standard] in the [HDMI Setup] menu on the receiver.
3
Set the HDMI OUTPUT setting to [HDMI OUT A] on the receiver.
4
Turn off the Control for HDMI function for all devices connected to the receiver except the TV.
For details, refer to the operating instructions of the connected devices.
5
Turn off any settings for the operation of other devices on the TV’s remote control.
For details on setting the TV, refer to the operating instructions of the TV.
6
Switch the input of the receiver to [TV].
7