Help Guide (Web manual)

Checking the software version (Software Version) [162]
Updating the software via the network (Network Update) [163]
Updating the software using the USB flash drive (USB Update) [164]
Setting the tuner (Tuner Setup) [165]
Install Setup
Turning on control mode for maintenance (External Control) [166]
Switching on/off the 12V trigger output (Trigger 1/2/3) (for STR-ZA3100ES) [167]
Switching on/off the 12V trigger output (Trigger) (for STR-ZA2100ES/STR-ZA1100ES) [168]
Displaying a test screen (Test Picture for HDMI Out A/B) [169]
Locking settings of the receiver (Settings Lock) [170]
Using the menu on the display panel
Operating the receiver with the menu on the display panel [171]
Viewing information on the display panel [172]
Reverting to the factory default settings [173]
Troubleshooting
Error messages
PROTECTOR [174]
UPDATE FAILED [175]
FAN STOPPED (for STR-ZA3100ES only) [176]
List of messages after Auto Calibration measurements [177]
Network features message list [178]
General
The receiver is turned off automatically. [179]
The receiver does not turn on after performing USB Update or Network Update. [180]
The receiver does not turn on even when the TV is turned on. [181]
The receiver turns off when the TV is turned off. [182]
The receiver does not turn off even when the TV is turned off. [183]