Help Guide (Web manual)

[61] Enjoying Video and Sound Listening to the radio
Tuning to a station directly (Direct Tuning)
You can enter the frequency of a station directly.
Note
If the tuned frequency is invalid or out of range, [---.-- MHz] or [---- kHz] appears and then the screen returns to the
current frequency.
Make sure you have entered the right frequency. If not, repeat steps 3 and 4. If you still cannot tune to a station, the
frequency may not be in use in your area.
Hint
Adjust the direction of the AM loop antenna (aerial) for optimum reception upon tuning to an AM station.
The tuning scale for direct tuning is shown below:
FM: 100 kHz
AM: 10 kHz (*)
[62] Enjoying Video and Sound Listening to the radio
Changing the AM tuning scale
You can change the AM tuning scale to either 9 kHz or 10 kHz using the buttons on the receiver.
Be sure to use the buttons on the receiver to perform this operation.
Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu.
If the Simple mode screen appears, switch to the Full mode screen by pressing OPTIONS and selecting
[Full] in [FM/AM Display] from the options menu.
1
Press
/ / / to select the Frequency indication and then press .
2
Enter the frequency using
/ / / .
3
Press
/ to select a digit.
1.
Press / to change the digit.
2.
Press .
4
The AM tuning scale can be changed. For details, see “Changing the AM tuning scale.”
*
Turn off the receiver.