Help Guide (Web manual)

ceiling (In-Ceiling Speaker Mode)

Set whether or not to use In-Ceiling Speaker Mode with the current input.

In a setup where the front and center speakers are installed in the ceiling, lowering the audio output position to

the screen height allows you to enjoy a more natural experience.

Note

This function does not work in the following cases:

[Direct] is being used and an analog input is selected.

Dolby Atmos enabled speakers are used.

Dolby Atmos is being decoded.

[Pure Direct] is set to [On].

This function may not work depending on the audio format.

The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals

depending on the audio format.

Hint

You can also switch this function on/off for each input on the Input Setup screen.

You can also select [In-Ceiling Speaker Mode] in [Sound Effects] from the home menu.

You can also switch the function on/off by pressing IN-CEILING SP on the remote control or the receiver.

To obtain optimal effects in the listening environment, configure the [Ceiling Height] setting and perform Auto

Calibration.

[69] Enjoying Video and Sound Enjoying sound effects

Enjoying high-fidelity sound (Pure Direct)

You can enjoy higher-fidelity sound from all inputs using the Pure Direct function. When the Pure Direct function

is on, the display panel lights off to suppress noise that affects sound quality.

Select [Setup] - [Audio Setup] from the home menu.

Select [In-Ceiling Speaker Mode].

Select the setting you want.

Front & Center: Lowers the audio output position for both the front and center speakers installed in

ceiling to the screen height.

Front: Lowers the audio output position for the front speakers installed in ceiling to the screen height.

Off: Does not activate this function.