Help Guide (Web manual)

Only 2ch PCM signals are output to Zone 2.

Digital audio stream signals such as DSD and Dolby Digital are not output to Zone 2.

Multi-channel stream signals are automatically converted to 2 channels signals, and then output to Zone 2 if

the same source signals as the main zone are selected in Zone 2.

Note

When [FM TUNER] or [AM TUNER] is selected at the same time in the main zone and Zone 2 or Zone 3, the item most

recently selected will be set.

If you change the sound field or speaker settings in the main zone while the input for Zone 2 is set to [SOURCE] or the

same input is selected in the main zone and Zone 2, the sound may also be momentarily interrupted in Zone 2.

Input sources which can be output to Zone 2 (HDMI connection)

The following input sources can be output to Zone 2 when Zone 2 speakers are connected to another receiver or

amplifier connected to the HDMI OUT B (ZONE 2) jack.

SAT/CATV

Source signal from the HDMI IN 2 (SAT/CATV) jack (*1)

GAME

Source signal from the HDMI IN 6 (GAME) jack (for STR-ZA3100ES/STR-ZA2100ES) on the

front panel or HDMI IN 3 (GAME) jack (for STR-ZA1100ES) (*1)

STB

Source signal from the HDMI IN 3 (STB) jack (for STR-ZA3100ES/STR-ZA2100ES) or HDMI

IN 4 (STB) jack (for STR-ZA1100ES)

VIDEO

Source signal from the HDMI IN 4 (VIDEO) jack (for STR-ZA3100ES/STR-ZA2100ES only)

(*1)

Source signal from the VIDEO IN VIDEO jack

Source signal from the VIDEO AUDIO IN jacks

AUX

Source signal from the DIGITAL OPTICAL IN 1 (AUX) jack (*1)

Source signal from the VIDEO IN AUX jack

Source signal from the AUX AUDIO IN jacks

Source signal from the DIGITAL OPTICAL IN 2 (TV) jack (*1)

Source signal from the TV AUDIO IN jacks

SA-

CD/CD

Source signal from the HDMI IN 5 (SA-CD/CD) jack (*1)

Source signal from the SA-CD/CD AUDIO IN jacks

TUNER

FM broadcast received through the built-in tuner

TUNER

AM broadcast received through the built-in tuner

The following restrictions are set on the digital audio signals input from the HDMI, coaxial and optical input jacks on the receiver:

If the digital audio signals input from the HDMI, coaxial and optical input jacks on the receiver are not output to Zone 2, set the audio

output to 2ch PCM on the connected device. For details, refer to the operating instructions of the connected device.